User's Manual

Appendix: Using Multi-Display Administrator 31
Initial Setup
The following operations must be performed before you can use the Multi-Display
Administrator to manage your display(s).
Installing Multi-Display Administrator
Ensure that the computer meets the minimum system requirements set forth on page 30.
1. Locate the setup.exe file and double-click it to begin installation.
2. Follow the on-screen instructions to complete the installation.
Connecting display(s) to the computer
The Multi-Display Administrator supports Ethernet LAN connections to your display(s).
You can choose one that best suits your display deployment and network environment.
RJ-45 Ethernet connection
As illustrated in the figure below, connect the computer and displays to the Ethernet
LAN or WAN network via a hub, switch or router using RJ-45 cables.
For details on the location of ports and connectors, and instructions on the OSD settings,
please refer to the documentations of the computer and display.
To check the network information, go to Settings > Ethernet checking on the Android
system.
Computer
Hub, switch
or router
Display
RJ-45 cables