QPro VGA Wireless Dongle Quick Start Guide
Copyright © 2014 BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Table of Contents Copyright......................................................................................................................................... i Disclaimer........................................................................................................................................ i Introduction.................................................................................................................................... 1 Package contents................................
Introduction Thank you for choosing BenQ VGA wireless dongle - QPro, which works with the BenQ QPresentor Pro app (installed on your mobile device) and enhances wireless presentation. The dongle can be connected to any display such as projector, LCD monitor, or TV, as long as supported I/O ports are available. In this document, connection with a projector is used as an example. The installation and operation may vary by the connected devices.
Package contents 1 2 3 4 5 INPU T DC EV OU TP UT DC EV 111QPro dongle x 1 222USB cable x 1 333Power bank x 1 444Quick start guide x 1 555Traveling case x 1 Product overview Dongle Power bank Function button NFC tag INPU TD CEV OU TPU USB port (for power supply) TD CEV VGA connector Power input port LED indicators Power output port Charging the power bank You must fully charge the power bank before using it for the first time.
Connecting the QPro dongle 111Connect the dongle to the supplied power bank using the USB cable. The LED indicator lights up in solid blue. NFC 222Connect a VGA cable to the dongle and a display (e.g. projector). And turn on the projector. 2 1 333The first time you use the dongle, select a language by pressing the function button on the dongle. Keep pressing the function button to move the highlight bar to a desired language, and wait for 10 seconds until the language is selected.
Installing the QPresentor Pro app and connecting to the dongle The dongle works with the QPresentor Pro app to make wireless presentation easily. Once the dongle is powered on and connected to your projector successfully, you are prompted to install QPresentor Pro and establish wireless connection before your first presentation. You can install the app via NFC function or QR code. Alternatively, search for QPresentor Pro manually from the online app store for installation.
Installing QPresentor Pro via QR code 111Make sure your device is connected to the Internet and a QR code scanner app is launched. 222You are provided with two QR codes on the screen; one is for Android devices and the other is for iOS devices. Aim the camera lens of your device at the appropriate QR code to download and install the QPoresentor Pro app from the online app store. 333Go to the Wi-Fi setting of your device, and scan for an SSID named BenQ_VGAxxxxxx to make the connection.
Regulatory Statements Battery caution •• Do not put the power bank in the direct heat, humidity. Avoid fire. •• Do not drop the power bank. •• Do not expose the power bank to water or moisture, this could result in malfunction. Battery safety notice Please note the following: •• When the power bank fail to function, replace it immediately. •• Chemicals which leak from the power bank may cause skin irritation.
BenQ.com © 2014 BenQ Corporation All rights reserved. Rights of modification reserved.
