Operation Manual

English
66
Control the projector through a web browser
Open a web browser and enter the projector's IP address. Its home page with four options will
display:
Projector Status: Current projector settings.
Alert Mail Setup: Settings for projector abnormality email reminders. In case of any abnormality the
projector sends emails to preset users.
Crestron: Crestron compatible network browser control page.
PJLink: This page lets you set up a security password for PJLink connection.
Projector Status
The following illustrates a projector with IP address "192.168.0.100":
System
Model Name : Model number of the projector
Software Version : Version of projector system software
System Status : Current projector power on status
Display Source : Current input signal
Lamp 1 Hours : Use hours of lamp 1
Lamp 2 Hours : Use hours of lamp 2
Error Status : Display projector error messages
Network control setup information (RJ-45 Version)
Lan Version : Version of network control software
IP address : Current IP address
Subnet mask : Current subnet setting
Default gateway : Current gateway setting
DNS server : Current DNS server setting
MAC address : Preset MAC address