Operation Manual

English
54
5. Cover the lamp cap by tightening the lamp screws with a screwdriver.
6. Replace the lamp compartment cover and fasten the screws.
• Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector. To reduce the risk of
injuriestongersanddamagetointernalcomponents,usecautionwhenremovinglampglassthathasshattered.
• Do not place the lamp in locations where water might splash on it, children can reach it, near or above heat
sources,ornearammablematerials.
• Do not insert your hand into the projector when the lamp is removed. If you touch the optical components inside,
it could cause blurred images.
• Please be careful to not over-tighten the screws. Loose screws may cause a bad connection, which could result in
malfunction.