Operation Manual

English

OSD menu - ALIGNMENT

• Projector Installation

Press

◄►

arrow key to select Projector Installation : Front Table, Rear Table, front Ceiling, rear

Ceiling, Upward + front, and Downward + front.

Caution:

The cooling fan speed varies with projection mode to ensure the projector's proper heat dissipation. Invalid projection

can lead to the projector overheating or shortened lamp life. Be careful to choose the correct projection mode when

installing your projector.

• Lens Control

Select this function or press the LENS Shift button on the remote controller to open the lens

control menu to zoom, focus or shift the lens. Press Enter key to switch zoom/focus or lens shift

menu, press

◄►

arrow key focus the projected image or shift the lens in horizental direction,

and

▲▼

to zoom the projection size or shift the lens in vertical direction.

• Lens Memory

The projector can memorize up to 10 zoom, focus, and lens shift settings. You can give each

group of settings a unique name with the virtual keyboard. You can save current lens position

(horizontal and vertical), zoom and focus settings as well as retrieve and load saved lens memory

for the projector to apply the newly loaded lens shift, zoom, and focus settings.