Operation Manual

English
42
When the temperature rises, the cooling fan speeds up (with higher noise) to exhaust
the internal heat energy out of the projector and ensure its normal operation. However,
the projector may turn off automatically if it is used in an environment at excessively high
temperature or in an area at a high altitude. In this case, you can enable this function by setting
it to ON and have the cooling fan operate at a higher speed to control the internal temperature
of the projector.
Note:
An area is considered high altitude when it is above 5000 feet.
• Custom Power Level
Press
◄►
arrow key to customize lamp output power in the range of 75-100% of normal
mode. This function is valid only when the Power option is set to Custom Power Level mode. In
the other two modes, Normal and ECO, this function is disabled (dimmed).
• Lamp 1 Status
Indicates status of lamp 1 now, ON or OFF.
• Lamp2 Status
Indicates status of lamp 2 now, ON or OFF.