Operation Manual

English

Making connections

Preparations

When connecting a signal source to the projector, be sure to:

1. Turn off all equipment before making any connections.

2. Use only the correct type cables for each source with proper type plugs.

3. Ensurethatallcableplugsarermlyttedtotheequipmentjacks.

Note that all cables shown in the following connection diagrams may not be supplied with the projector (See "Shipping

contents" on page 7 Shipping contents). Most cables are commercially available from electronics stores.

Connect to PC

You may connect a PC to your projector with a DVI-D, HDMI, RGB or RGBHV (BNC) cable for

projection, and connect an external display to your projector for concurrent viewing if the input is

RGB signal.