Operation Manual

49 Navigating the main menu
AMA Improves the gray level response time of the LCD panel. • ON
• OFF
Auto Power
Off
Sets the time to power off the monitor automatically in
power saving mode.
• OFF
• 10 min.
• 20 min.
• 30 min.
Sleep
Function
Enables monitor’s Sleep mode for power saving. • Enable
• Disable
Auto Pivot Sets to rotate the OSD menu with the monitor. • ON
• OFF
Resolution
Notice
Sets whether to display the resolution notice of the
recommended resolution when a new input source is
detected by the monitor.
• ON
• OFF
Custom Key
1
Sets the function to be accessed by custom key 1.
• Brightness
• Contrast
• Input
• Color Mode
• Color Temp.
• Gamma
• Color Gamut
• Black Level
• PIP /PBP
Custom Key
2
Sets the function to be accessed by custom key 2.
Custom Key
3
Sets the function to be accessed by custom key 3.
Controller
Key 1
Sets the feature or setup menu to be accessed by
Controller Key 1.
• Standard
• Rec. 709
• EBU
• SMPTE-C
• Calibration 1
• Calibration 2
• Custom 1
• Custom 2
Controller
Key 2
Sets the feature or setup menu to be accessed by
Controller Key 2.
Controller
Key 3
Sets the feature or setup menu to be accessed by
Controller Key 3.
DDC/CI Allows the monitor settings to be set through the software
on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards Association
(VESA). DDC/CI capability allows monitor controls to be sent via
the software for remote diagnostics.
• ON
• OFF
Item Function Range