User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Power safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- Basic menu operation
- Customizing the hot keys
- Adjusting display mode
- Choosing an appropriate picture mode
- Working with two video sources (KVM Switch)
- Working with DualView
- Connecting multiple monitors via MST (Multi-Stream Transport)
- Working with HDR technology
- Adjusting screen brightness automatically (Bright Intelligence)
- Navigating the main menu
- Troubleshooting
34 How to adjust your monitor
Working with DualView
DualView helps improve your image editing efficiency by showing an image of two different
picture modes side-by-side.
1. Select one picture mode from Picture Advanced > Picture Mode.
2. Go to Picture Advanced > DualView. The screen is divided into two windows and the
selected picture mode is applied to the left window.
3. A list of available picture modes for the right window is displayed. Select one to apply the
setting.
Connecting multiple monitors via MST (Multi-Stream
Tr a n sp o r t )
With connection via the DP-IN and DP-OUT ports, you can output content to one or up to 4
monitors via MST function.
1. Connect your laptop to the USB-C™ / DP port on the monitor using a USB-C™ / DP
cable. Select
Yes to enable USB-C™ power delivery in monitor standby mode if you are
prompted to. The USB-C™ port supplies power to the laptop then even when the monitor
is in standby mode.
Picture with the
setting from
Picture
Advanced >
Picture Mode
Picture with the
setting from
Picture
Advanced >
DualView
LAN
DP cable
USB-C™ cable
System > MST > ONSystem > MST > ON
DP cable
or