User Manual
Table Of Contents
- Copyright
- Disclaimer
- Power Safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Working with the hot keys
- Hotkey Puck G2 and its basic operations
- Adjusting Display Mode
- Choosing an appropriate color mode
- Working with two video sources (KVM Switch)
- Video source selection in PIP mode
- Video source selection in PBP mode
- Connecting multiple monitors (Thunderbolt™ 3 daisy chaining)
- Working with HDR technology
- Working with two color settings on the same image (DualView)
- Navigating the main menu
- Troubleshooting
57 Navigating the main menu
KVM Switch menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out. And keys that are not available will be
disabled and the corresponding OSD icons will disappear. For models without certain
functions, their settings and related items will not appear on the menu.
1. Select (Menu) from the hot key menu.
2. Use or to select KVM Switch.
3. Select to go to a sub menu, and then use or to select a menu item.
4. Use or to make adjustments, or use to make selection.
5. To return to the previous menu, select .
6. To exit the menu, select .
Thunderbolt 3
DisplayPort
HDMI1
HDMI2
None
Input
Picture
Color
Audio
KVM Switch
Custom Key
MoveBack Confirm
System
2
Mode: sRGB
Thunderbolt 3
USB Upstream
Video Input
Auto Switch
Item Function Range
Thunderbolt 3 Switches the keyboard and mouse control over the input
source / display connected to the Thunderbolt™ 3 port.
USB Upstream Switches the keyboard and mouse control over the input
source / display connected to the USB Upstream port. The
video input that goes with this USB Upstream port has to
be pre-defined. See Setting up the second video source for
KVM Switch before use on page 41.