User Manual
Table Of Contents
- Copyright
- Disclaimer
- Power Safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Working with the hot keys
- Hotkey Puck G2 and its basic operations
- Adjusting Display Mode
- Choosing an appropriate color mode
- Working with two video sources (KVM Switch)
- Video source selection in PIP mode
- Video source selection in PBP mode
- Connecting multiple monitors (Thunderbolt™ 3 daisy chaining)
- Working with HDR technology
- Working with two color settings on the same image (DualView)
- Navigating the main menu
- Troubleshooting
52 Navigating the main menu
Color menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out. And keys that are not available will be
disabled and the corresponding OSD icons will disappear. For models without certain functions,
their settings and related items will not appear on the menu.
1. Select (Menu) from the hot key menu.
2. Use or to select Color.
3. Select to go to a sub menu, and then use or to select a menu item.
4. Use or to make adjustments, or use to make selection.
5. To return to the previous menu, select .
6. To exit the menu, select .
Input Color Mode
DualView
Color Temperature
Advanced
Picture
Color
Audio
KVM Switch
Custom Key
MoveBack Confirm
System
2
Mode: sRGB
Gamma
Hue
Saturation
Reset Color
AMA
HDMI RGB PC Range
505050505050
RGBCMY
Item Function Range
Color Mode Select a color mode that best suits the type of images shown on
the screen.
DCI-P3 For better color matching representation with
Standard DCI-P3.
Display P3 For better color matching representation with
Standard Display-P3.
HDR For better color matching representation with High
Dynamic Range (HDR) technology.
Not available when PIP / PBP mode is enabled.