User Manual
Table Of Contents
- Copyright
- Disclaimer
- Power Safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Working with the hot keys
- Hotkey Puck G2 and its basic operations
- Adjusting Display Mode
- Choosing an appropriate color mode
- Working with two video sources (KVM Switch)
- Video source selection in PIP mode
- Video source selection in PBP mode
- Connecting multiple monitors (Thunderbolt™ 3 daisy chaining)
- Working with HDR technology
- Working with two color settings on the same image (DualView)
- Navigating the main menu
- Troubleshooting
49 Navigating the main menu
PIP Sets the PIP mode. Pictures from two independent video
sources are displayed on the screen at the same time.
The audio input is from the main source if the PIP mode is
activated.
Not available when HDR function is enabled.
Main Determines the main video source. •Thunderbolt
3
•DisplayPort
•HDMI1
•HDMI2
Sub Determines the second video source for PIP
mode.
•Thunderbolt
3
•DisplayPort
•HDMI1
•HDMI2
PIP Size Determines the size of the inset window in the
PIP mode.
•Small
•Medium
•Large
PIP
Position
Adjusts the position of the inset window in the
PIP mode.
•To p R i g h t
•To p L e f t
•Bottom Right
•Bottom Left
PBP Sets the PBP mode to have two pictures displayed
side-by-side. Determines the video sources for the left and
the right windows respectively.
Not available when HDR function is enabled.
•Left
•Right
PBPx4 Sets the PBP mode to have four pictures displayed
side-by-side. Determines the video sources for four
windows respectively.
Not available when HDR function is enabled.
•Top Left
•To p R i g h t
•Bottom Left
•Bottom Right
SWAP Swaps the video screens.
•For PIP / PBP mode: the main and the sub sources will be
switched.
•For PBPx4 mode: the sources will be switched clockwise.
Item Function Range