User's Manual

31 How to adjust your monitor
4. In the sub menu, select a function that can be accessed by this key. A pop-up message will
appear, showing that the setup is complete.
Adjusting display mode
To display images of aspect ratio other than 16:9 and size other than the panel size of your
purchased model, you can adjust the display mode on the monitor.
1. Press any of the control keys to bring up the hot key menu. Select (Menu) to access
the main menu.
2. Go to Picture Advanced and Display Mode.
3. Select an appropriate display mode. The setting will take effect immediately.
Choosing an appropriate picture mode
Your monitor provides various picture modes that are suitable for different types of images.
See Picture Mode on page 41 for all the available picture modes.
Go to Picture Advanced and Picture Mode for a desired picture mode.
Working with two video sources (KVM Switch)
If you have two computer systems, you might find yourself busy going back and forth between
two sets of keyboard and mouse to control each display separately. Now with the KVM feature
and sufficient I/O ports on one monitor, you can work with one set of keyboard and mouse
only.
To use KVM Switch feature, toggle between USB-C or USB Upstream under KVM Switch.
• KVM Switch > USB-C: Switches to the USB-C™ input.
• KVM Switch > USB Upstream: Switches to one of the video inputs other than USB-C™.
With appropriate setting, the display is switched to the set input while the keyboard and
mouse control is switched as well. To determine the input, see Setting up the second video
source for KVM Switch before use on page 31.
You can designate one of the custom keys to
KVM Switch to toggle between the options
quickly. See Customizing the hot keys on page 30.
Setting up the second video source for KVM Switch before use
One of the video sources is pre-defined to be transmitted via USB-C™ and cannot be changed.
The other source can come from other available inputs and should be set appropriately in
advance.
1. Connect the second video source to one of the video inputs other than USB-C™ on the
monitor using an appropriate cable.
2. Press any of the control keys to bring up the hot key menu. Select (Menu) to access
the main menu.
3. Go to KVM Switch > Video Input.
4. Change the setting according to your scenario.