User's Manual

49 Navigating the main menu
Custom Key
1
Sets the function to be accessed by custom key 1. • Picture Mode
• Input
• DisplayPort
• USB-C
• HDMI
• Rec. 709
• sRGB
• CAD / CAM
• Animation
• M-book
• Low Blue Light
• Darkroom
• Brightness
• DualView
• KVM Switch
• Contrast
• Volume
• Mute
Custom Key
2
Sets the function to be accessed by custom key 2.
Custom Key
3
Sets the function to be accessed by custom key 3.
MST Allows data transmission while multiple monitors are
daisy-chained.
• ON
• OFF
DDC/CI Allows the monitor settings to be set through the software
on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards Association
(VESA). DDC/CI capability allows monitor controls to be sent via
the software for remote diagnostics.
• ON
• OFF
DP Auto
Switch
When this function is activated, DP port will be in the
input auto select loop. Otherwise, DP can only be selected
by input select or by hot key.
• ON
• OFF
HDMI Auto
Switch
When this function is activated, HDMI port will be in the
input auto select loop. Otherwise, HDMI can only be
selected by input select or by hot key.
• ON
• OFF
Auto Power
Off
Sets the time to power off the monitor automatically in
power saving mode.
• OFF
• 10min.
• 20min.
• 30min.
Resolution
Notice
Sets whether to display the resolution notice of the
recommended resolution when a new input source is
detected by the monitor.
• ON
• OFF
Item Function Range