User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Power safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- Basic menu operation
- Customizing the hot keys
- Adjusting display mode
- Choosing an appropriate picture mode
- Working with two video sources (KVM Switch)
- Working with DualView
- Connecting multiple monitors via MST (Multi-Stream Transport)
- Working with HDR technology
- Adjusting screen brightness automatically (Bright Intelligence)
- Navigating the main menu
- Troubleshooting
33 How to adjust your monitor
Activating the Auto Switch function of KVM Switch
After the second source has been set properly from KVM Switch > Video Input, you can go to
KVM Switch > Auto Switch and turn on the Auto Switch function. Once enabled, if the
computer with keyboard and mouse control is powered off or any of the cable is disconnected,
the input source and the USB control will be switched to the other computer automatically.
The KVM Auto Switch might not switch video and USB signals simultaneously if None is selected from KVM
Switch
> Video Input. In this case, select a video input manually from Input > Signal Input.
PC 1 PC 2
PC 1 PC 2
PC 1
PC 2
Scenario A-1
(If USB-C™ is disconnected)
Scenario A-2
(If USB Upstream is disconnected)
PC 1 PC 2
PC 1 PC 2
Scenario B-1
(If USB-C™ is disconnected)
Scenario B-2
(If USB Upstream is
disconnected)