User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Power safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- Basic menu operation
- Customizing the hot keys
- Adjusting display mode
- Choosing an appropriate picture mode
- Working with two video sources (KVM Switch)
- Working with DualView
- Connecting multiple monitors via MST (Multi-Stream Transport)
- Working with HDR technology
- Adjusting screen brightness automatically (Bright Intelligence)
- Navigating the main menu
- Troubleshooting
16 How to assemble your monitor hardware
5. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the
other end to a power outlet just yet.
6. Organize the cables.
Route the cables via the cable management hole.
7. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on
the monitor.
Turn on the computer too, and follow the instructions
in Getting the most from your BenQ monitor on page
22 to install the monitor software.
To extend the service life of the product, we recommend
that you use your computer's power management function.