PB9200-e.
PB9200-e.book Page 2 Thursday, May 27, 2004 2:15 PM Copyright Copyright 2004 by BENQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
PB9200-e.book Page iii Thursday, May 27, 2004 2:15 PM Table of Contents Projector Features ........................................................ 1 Preparation ................................................................... 2 Part Names ................................................................... 3 Projector ...................................................................................... 3 Control Buttons ..........................................................................
PB9200-e.book Page iv Thursday, May 27, 2004 2:15 PM Correcting The Keystone Distortion ..........................................17 Adjusting The Volume ................................................................18 Muting The Sound ......................................................................18 Temporarily Blanking The Screen .............................................18 Freezing The Screen ....................................................................19 Using The Magnify Feature ...
PB9200-e.book Page v Thursday, May 27, 2004 2:15 PM Troubleshooting ........................................................... 40 Related Messages ........................................................................ 40 Related Messages (continued) ................................................... 41 Regarding The Indicator Lamps ................................................ 42 Regarding The Indicator Lamps (continued) ...........................
PB9200-e.
PB9200-e.book Page 1 Thursday, May 27, 2004 2:15 PM Projector Features This multimedia projector is used to project various computer signals as well as NTSC/PAL/ SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized. • Ultra High Brightness Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highlyefficient optical system.
PB9200-e.book Page 2 Thursday, May 27, 2004 2:15 PM Preparation Please see the “Contents Of Package” of the “User’s Manual – Quick Guide”. Your projector should come with the items shown there. Contact your dealer anything is missing. Note: Keep the original packing material for future reshipment. For moving the projector, be sure to use the original packing material. Use special caution for the lens part.
PB9200-e.book Page 3 Thursday, May 27, 2004 2:15 PM Part Names Projector Elevator button Elevator foot 3 Remote sensor 4 Lens cap 5 Lens The picture is projected from here. 6 Filter cover An air filter is inside.
PB9200-e.
PB9200-e.book Page 5 Thursday, May 27, 2004 2:15 PM Setting Up Arrangement WARNING • Before installation, make sure that the projector is turned off and the power code is disconnected. • • Do not set up and move the projector, while it is hot. Install the projector in a suitable environment according to instructions of the “User’s Manual – Safety Guide” and this manual. • The power outlet should be close to the projector and easily accessible.
PB9200-e.book Page 6 Thursday, May 27, 2004 2:15 PM Adjusting The Projector's Elevator WARNING • Do not touch about the lens and ventilation openings during use or immediately after use to prevent a burn. CAUTION • To prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust the elevator feet.
PB9200-e.book Page 7 Thursday, May 27, 2004 2:15 PM Connecting Your Devices WARNING • Whenever attempting to connect other devices to the projector, read thoroughly the "User's Manual - Safety Guide", this manual and the manual of each device to be connected. Incorrect connecting could result in fire or electrical shock. CAUTION • TURN OFF ALL DEVICES prior to connecting them to the projector.
PB9200-e.book Page 8 Thursday, May 27, 2004 2:15 PM Please refer to the following (for example) for connecting your devices. See the rear of the projector.You can see the ports.
PB9200-e.
PB9200-e.
PB9200-e.book Page 11 Thursday, May 27, 2004 2:15 PM Remote Control About The Laser Pointer WARNING • The laser pointer of the remote control is used in place of a finger or rod. Never look directly into the laser beam outlet or point the laser beam at other people. The laser beam can cause vision problems. CAUTION • Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
PB9200-e.book Page 12 Thursday, May 27, 2004 2:15 PM Operating The Remote Control CAUTION • • • • • Do not disassemble the remote control. Do not place the remote control near the projector’s lens, fan, or vents. Do not drop or otherwise expose the remote control to physical impact. Do not get the remote control wet or place it on wet objects on it. Doing so may result in malfunction.
PB9200-e.book Page 13 Thursday, May 27, 2004 2:15 PM Using The Remote ID Feature This is the function to properly use when you use two or three same type projectors at the same time. This function should be used combining a setup of a projector. LASER INDICATOR STANDBY/ON VIDEO + RGB + + LENS SHIFT FOCUS 1. Set the ID number to the projector beforehand, referring to the item “IR REMOTE ID” of the section “OPTION Menu”.
PB9200-e.book Page 14 Thursday, May 27, 2004 2:15 PM Power ON/OFF WARNING • When the power is ON, a strong light is emitted. Do not look into the lens or vents of the projector. NOTE • Turn the power on/off in right order. Please power on the projector before the connected devices. Power off the projector after the connected devices. Turning On The Power 1. 2. Remove the lens cap. STANDBY/ON Set the power switch to [ | ] (ON).
PB9200-e.book Page 15 Thursday, May 27, 2004 2:15 PM Operating Selecting An Input Signal 1. Select an input signal. SEARCH button ■ Using the INPUT dial KEYSTONE Turn the INPUT dial of the projector. Turning the dial cycles through the input ports as shown below. Select the signal you wish to project. M1-D VIDEO RGB BNC S-VIDEO SEARCH M1-D INPUT RGB RESET BNC COMPONENT COMPONENT ■ Using SEARCH button ENTER MENU S-VIDEO VIDEO Press the SEARCH button of the projector or the remote control.
PB9200-e.book Page 16 Thursday, May 27, 2004 2:15 PM Selecting The Aspect Ratio 1. Press the Aspect button to toggle between the modes for aspect ratio. ■ At a M1-D signal NORMAL 4:3 LASER INDICATOR STANDBY/ON VIDEO 16:9 + – – – ASPECT LASER PREVIOUS ASPECT button NEXT MOUSE ESC MENU POSITION RESET AUTO PinP VOLUME FREEZE MUTE MAGNFY ON OFF 16:9 4:3 + ZOOM BLANK memo NORMAL keeps the original aspect ratio of the input signal.
PB9200-e.book Page 17 Thursday, May 27, 2004 2:15 PM Adjusting The Picture Position 1. Press the POSITION button. As illustrated on the right, a dialog will appear on the screen to aid you in adjusting the position. 2. LASER INDICATOR STANDBY/ON VIDEO + + ZOOM – – – BLANK ASPECT LASER POSITION PREVIOUS NEXT Cursor buttons MOUSE Use the cursor buttons / / / to adjust the position.
PB9200-e.book Page 18 Thursday, May 27, 2004 2:15 PM Adjusting The Volume 1. Press the VOLUME button. As illustrated on the right, a dialog will appear on the screen to aid you in adjusting the volume. 2. Use the cursor buttons / to adjust the volume. 3. Press the VOLUME button again to close the dialog and complete this operation. memo Even if you don't do anything, the dialog will automatically disappear after a few seconds.
PB9200-e.book Page 19 Thursday, May 27, 2004 2:15 PM Freezing The Screen 1. 2. Press the FREEZE button. As illustrated on the right, a dialog will appear on the screen, and the screen will freeze at the current image. Press the FREEZE button again to restore the screen to normal. The icon “||” will change to the icon “ 4 ”.
PB9200-e.book Page 20 Thursday, May 27, 2004 2:15 PM Displaying The Child Window memo This feature called "PinP (Picture in Picture)" is available only when a RGB signal is selected to main screen. 1. 2. Press the PinP button. The child window with a picture of a video signal will appear. Press the PinP button again to change the size of the child window or close the window.
PB9200-e.book Page 21 Thursday, May 27, 2004 2:15 PM Multifunctional Settings Using The Menu Functions This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO, SCREEN, OPTION and NETWORK. Each of these menus is operated using the same methods. The basic operations of these menus are as follows. 1. Press the MENU button. The menu will appear on the screen. ex.
PB9200-e.book Page 22 Thursday, May 27, 2004 2:15 PM MAIN Menu With the MAIN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT +0 +0 4:3 NORMAL NORMAL ENGLISH BRIGHT CONTRAST ASPECT WHISPER MIRROR LANGUAGE [Language] RESET Description BRIGHT Adjust the brightness using the 5 / 6 buttons.
PB9200-e.book Page 23 Thursday, May 27, 2004 2:15 PM PICTURE-1 Menu With the PICTURE-1 menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT GAMMA COLOR BAL R COLOR BAL G COLOR BAL B SHARPNESS COLOR TINT MY MEMORY NORMAL +0 +0 +0 +0 +0 +0 LOAD1 Description Select a gamma mode using the 5 / 6 buttons.
PB9200-e.book Page 24 Thursday, May 27, 2004 2:15 PM PICTURE-1 Menu (continued) Item Description Select a command to load or save using the 5 / 6 buttons, and then press the (or the ENTER) button to perform the function.: MY MEMORY This projector has 4 numbered memories for adjustment data. Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current adjustment data on the memory whose number corresponds with the command’s number.
PB9200-e.book Page 25 Thursday, May 27, 2004 2:15 PM PICTURE-2 Menu MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT With the PICTURE-2 menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. memo This menu cannot be selected at a M1-D signal.
PB9200-e.book Page 26 Thursday, May 27, 2004 2:15 PM INPUT Menu With the INPUT menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT COLOR SPACE COMPONENT VIDEO 3D-YCS VIDEO NR P. INP. INPUT P. INP. POSIT. POWERUP INPUT AUTO COMPONENT AUTO TURN OFF LOW VIDEO RGB Description Select a color space mode using the 5 / 6 buttons.
PB9200-e.book Page 27 Thursday, May 27, 2004 2:15 PM INPUT Menu (continued) Item Description P.IN P. INPUT Select a signal input port for the child window using the / buttons. : VIDEO S-VIDEO memo About the child window, please refer to the section Displaying the Child Window. Select the display position of the child window using the tons. : / but- P.IN P. POSIT. memo About the child window, please refer to the section Displaying the Child Window.
PB9200-e.book Page 28 Thursday, May 27, 2004 2:15 PM AUTO Menu With the AUTO menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT ADJUST POWER OFF POWER ON SEARCH RESET 0 min TURN ON TURN ON Description Pressing the 4 (or the ENTER) button performs the automatic adjustment.
PB9200-e.book Page 29 Thursday, May 27, 2004 2:15 PM AUTO Menu (continued) Item Description Select the TURN ON or the TURN OFF using the 5 / 6 buttons. : TURN ON TURN OFF When the TURN ON is selected, detecting no signal cycles through input ports and displays the picture of retrieved signal. M1-D SEARCH RGB BNC VIDEO S-VIDEO COMPONENT memo When the TURN ON is selected, pressing the RGB button selects the M1-D ports, and pressing the VIDEO button selects the COMPONENT port.
PB9200-e.book Page 30 Thursday, May 27, 2004 2:15 PM SCREEN Menu With the SCREEN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT BLANK START UP MyScreen MyScreen SIZE MyScreen LOCK MENU POSITION MESSAGE RESET BLACK ORIGINAL x1 TURN OFF TURN ON Description Select a type of the BLANK screen using the 5 / 6 buttons.
PB9200-e.book Page 31 Thursday, May 27, 2004 2:15 PM SCREEN Menu (continued) Item Description Select the TURN ON or the TURN OFF using the 5 / 6 buttons. : MESSAGE RESET TURN ON TURN OFF When the TURN ON is selected, the following message function works. The message of the AUTO IN PROGRESS for the auto adjustment. The message of the NO INPUT IS DETECTED The message of the SYNC IS OUT OF RANGE The message of the Searching The message of the Detecting The indication of the input signal by input change.
PB9200-e.book Page 32 Thursday, May 27, 2004 2:15 PM OPTION Menu With the OPTION menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item VOLUME SPEAKER MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT VOLUME SPEAKER IR REMOTE IR REMOTE ID LAMP TIME FILTER TIME SERVICE PIN LOCK 16 TURN ON 1: 2: 3: ALL 1234 h 4321 h TURN ON Description Adjust the volume using the 5 / 6 buttons.
PB9200-e.book Page 33 Thursday, May 27, 2004 2:15 PM OPTION Menu (continued) Item Description Pressing the 4 (or the ENTER) button calls the SERVICE menu. SERVICE Menu SERVICE RESET SERVICE FANSPEED AUTO ADJUST LENS TYPE LENS LOCK NORMAL ENABLE AUTO TURN OFF Select an item using the 5 / 6 buttons, and : SELECT press the 4 (or the ENTER) button to per form each function. : FANSPEED AUTO ADJUST LENS TYPE LENS LOCK Select the fan speed level using the 5 / 6 buttons.
PB9200-e.book Page 34 Thursday, May 27, 2004 2:15 PM NETWORK Menu This projector provides the NETWORK function. If you use this function, please set up the projector according to the Network environment in which you use it. memo If DHCP function on your Network is activated, the following operation is not normally required, because DHCP function on this projector is active as initial settings. Please see the section “Network Setting Up”.
PB9200-e.book Page 35 Thursday, May 27, 2004 2:15 PM Network Setting Up This projector provides the NETWORK function. When you start to use this function, please consult your dealer for further information. To start, connect the NETWORK port to a gateway device via a CAT-5 cable, then set up the projector according to the Network environment in which you use it. When your Network enables the DHCP function You can set automatically, if you set the DHCP function to "TURN ON" using the NETWORK menu.
PB9200-e.book Page 36 Thursday, May 27, 2004 2:15 PM Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
PB9200-e.book Page 37 Thursday, May 27, 2004 2:15 PM Replacing The Lamp If the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible. 1. 2. Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes. Contact your dealer to prepare a new lamp. Tell the dealer your lamp type number. If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer to replace the lamp.
PB9200-e.book Page 38 Thursday, May 27, 2004 2:15 PM Air Filter WARNING • • • • Please carefully read the “User’s Manual - Safety Guide. Before caring, make sure the power switch is off and the power cable is not plugged in, then wait at least 45 minutes for the lamp to cool sufficiently. Use only the air filter of the specified type NJ08081. Do not use the projector with the air filter and filter cover removed. The use without the air filter could result in damage.
PB9200-e.book Page 39 Thursday, May 27, 2004 2:15 PM Other Care WARNING • • • • • Please carefully read the “User’s Manual - Safety Guide”. Before caring, make sure the power switch is off and the power cable is not plugged in. Be cautious of high temperature. Do not touch about the lens and ventilation openings during use or immediately after use prevent a burn. Never try to care for the inside of the unit yourself. Doing so is dangerous.
PB9200-e.book Page 40 Thursday, May 27, 2004 2:15 PM Troubleshooting Related Messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than the following appears, please contact your dealer or service company.
PB9200-e.book Page 41 Thursday, May 27, 2004 2:15 PM Related Messages (continued) Message Description CLEAN THE AIR FILTER The time the filter timer has counted has reached 100 hours. POWER OFF FIRST, THEN CLEAN THE AIR FILTER. AFTER CLEANING THE AIR FILTER, RESET THE FILTER TIMER. Please clear or change the air filter by referring to the section “Air Filter”. After caring for the air filter, please be sure to reset the filter timer. The internal portion temperature is rising.
PB9200-e.book Page 42 Thursday, May 27, 2004 2:15 PM Regarding The Indicator Lamps Lighting and flashing of the STANDBY/ON indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please respond in accordance with the instructions within the table. If the same indication is displayed after the treatment, or if an indication other than the following is displayed, please contact your dealer or service company.
PB9200-e.book Page 43 Thursday, May 27, 2004 2:15 PM Regarding The Indicator Lamps (continued) STANDBY/ ON indicator LAMP TEMP indicator indicator Description Either there is no lamp and/or lamp cover, or either of these has not been properly fixed. Blinking in Lighting in Red Red Please turn the power off, and allow the unit to cool down at least 45 minutes.
PB9200-e.book Page 44 Thursday, May 27, 2004 2:15 PM Phenomena That May Easily Be Mistaken For Machine Defects WARNING • Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur.
PB9200-e.book Page 45 Thursday, May 27, 2004 2:15 PM Phenomena That May Easily Be Mistaken For Machine Defects (continued) Phenomenon Cases not involving a machine defect The signal cables are not correctly connected. Referenc e pages 8, 9 Correctly connect the connection cables. The volume is adjusted to an extremely low level. Adjust the VOLUME to a higher level. Pictures are displayed, but no The sound is muted. sounds are heard. Press the MUTE button to restore the sound.
PB9200-e.book Page 46 Thursday, May 27, 2004 2:15 PM Warranty And After-Service If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.
PB9200-e.book Page 47 Thursday, May 27, 2004 2:15 PM Specifications NOTE • This specifications are subject to change without notice. Item Specification Product name Liquid crystal panel Panel size Drive system Pixels Lens Lamp Speaker Power supply Power consumption Temperature range Size Liquid crystal projector 2.5 cm (0.99 type) TFT active matrix 786,432 pixels (1024 horizontal x 768 vertical) Zoom lens F=1.7 ~ 2.4 f=30.5 ~ 45.8 mm 310W UHB 1.0W + 1.0W (Stereo) AC100~120V, 5.2A/AC220~240V, 2.
