PB7200 BenQ PB7220 PB7100 User’s Manual
Copyright Copyright © 2003 by BENQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BENQ Corporation.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Shipping Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Alternative Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BenQ PB7200/ PB7220/ PB7100 Manual llustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Accessories (included in the standard package) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Alternative Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BenQ PB7200/ PB7220/ PB7100 User’s Manual INTRODUCTION Caution TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER –SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. PLEASE READ THIS USER’S MANUAL BEFORE YOU OPERATE YOUR PROJECTOR. SAVE THIS USER’S MANUAL FOR FUTURE REFERENCE . Safety Instructions 1. Read this user’s manual before you operate your projector and save it for future reference. 2. The lamp becomes extremely hot during operation.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Shipping Contents The projector is shipped with the cables required for connection to standard PC or laptop computers. Carefully unpack and verify that you have all the items shown below. If any of these items are missing, please contact personnel at the place of purchase.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Projector Description Projector 11 Audio jack 2 External control panel (see next page) Projection lens 12 USB mouse connector 3 Front adjuster 13 S-Video jack 4 IR remote sensor 14 RS 232 control port 5 Ventilation grill 15 AC power cord inlet 6 Speaker 16 Main power switch 7 Projection lens adjuster 17 Rear adjuster feet 8 RGB (PC/ Mac) signal input - 1 18 Kensington lock slot 9 RGB (PC/ YPbPr/ YCbCr) signal input -2 Video connector
BenQ PB7200/ PB7220/ PB7100 User’s Manual External Control Panel 1 Power Presses the Power key to turn the projector on or off. 2 Source Selects signal sources from among RGB1, RGB-2, YPbPr, S-Video and Video. 4 Exit 5 Right 6 Menu Menu will display the menu system on screen. Press Menu again to access the sub-menus. Left and Right help you navigate among choices and settings in the menus and sub-menus.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Adjuster The projector is equipped with 1 quick-release adjuster foot. Push the button to adjust its tilt angle. 1. Lift the projector up and press the adjuster button to release the adjuster. 2. The adjuster will drop into position and be locked. Projector Features The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Remote Control Description Power LED Menu 3 Left/ Keystone 4 Right/ Keystone + Auto L-Click/ R-click Zoom in/ out By pressing ZOOM IN +, the center of the picture will be magnified. When the + button is pressed again, the picture is further magnified, up to four times the original size. By pressing ZOOM OUT -, the size of the image is reduced. When the button is pressed again, the picture is further reduced until it is restored to its original size.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Remote Control Effective Range The remote sensors are located on the front and the back of the projector. It can function in a range of 30 degrees horizontally and 30 degrees vertically relative to a line that is a right angle to the remote sensors. The distance between the remote control and the remote sensors must be shorter than 6 meters (19.5 feet). Installing or Replacing Batteries 1 Push and open the battery compartment lid in the direction shown.
BenQ PB7200/ PB7220/ PB7100 User’s Manual INSTALLATION Screen Size Place the projector at the required distance from the screen according to the desired picture size (see the table below). • 8 PB7200/ PB7220 (XGA) screen size chart Diagonal measurement Minimum Maximum zoom zoom inches feet inches feet inches 48 2.49 29.9 3.05 36.6 72 3.73 44.8 4.57 54.9 96 4.98 59.7 6.10 73.2 120 6.22 74.7 7.62 91.4 144 7.47 89.6 9.14 109.7 168 8.71 104.5 10.67 128.0 192 9.96 119.5 12.19 146.3 216 11.20 134.4 13.72 164.
BenQ PB7200/ PB7220/ PB7100 User’s Manual • PB7100 (SVGA) screen size chart Diagonal measurement Minimum Maximum zoom zoom inches feet inches feet inches 48 1.96 23.5 2.40 28.7 72 2.93 35.2 3.59 43.1 96 3.91 47.0 4.79 57.5 120 4.89 58.7 5.99 71.9 144 5.87 70.4 7.19 86.2 168 6.85 82.2 8.39 100.6 192 7.83 93.9 9.58 115.0 216 8.80 105.7 10.78 129.4 240 9.78 117.4 11.98 143.7 264 10.76 129.1 13.18 158.1 288 11.74 140.9 14.37 172.5 312 12.72 152.6 15.57 186.9 336 13.70 164.3 16.77 201.2 360 14.67 176.1 17.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Connecting to Various Equipment It only takes a few seconds to connect your projector to your desktop or notebook computer, VCR, or other systems. However, a Mac adapter (an optional accessory) is needed for connection to Macintosh computers. 1. Notebook/ Computer (Macintosh computer or SOG signal is only supported with RGB IN-1.) The USB cable is not needed unless you have a remote control with mouse functions. 10 2.
BenQ PB7200/ PB7220/ PB7100 User’s Manual 4.
BenQ PB7200/ PB7220/ PB7100 User’s Manual OPERATION Start Up 1. Plug the power cord into the projector and into a wall socket. 2. Turn on the main power switch. 3. Press and hold POWER to start the unit. The back-lit POWER key flashes green and stays green when the power is turned on. Projector Remote Control (When the power is turned off, there is a 90-second cooling period before the projector can be re-started.) 4. 12 Operation Switch on all connected equipment.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Digital Keystone Correction Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. To correct this, press 3 Left/ Right 4 (hot key) on the control panel of the projector or KEYSTONE 3/4 on the remote control, and then adjust the sliding bar labeled Keystone, as needed. Press + to correct keystoning at the top of the image. Press - to correct keystoning at the bottom of the image.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Source Selection When several input sources are available, press the SOURCE key to make a selection from the control panel of the projector or the remote control. Projector Remote control Blank Uses Blank to hide the screen image. You can unseal the image gradually by using the mouse of the remote control, or simply press Blank to turn on the image immediately.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Menu System Press Menu for the main menu, and then press 3or Menu again to select items in the sub-menu. 4 to select a sub-menu.
BenQ PB7200/ PB7220/ PB7100 User’s Manual 1. Display Menu FUNCTION DESCRIPTION Corrects any keystoning of the image. Keystone + - Adjusts the brightness of the image. Brightness Adjusts the degree of difference between dark and light in the image. Contrast Adjusts to avoid the occurrence of flicker. Phase *This function is not available when the input mode is Video or SVideo. Adjusts to fit in the desired image size.
BenQ PB7200/ PB7220/ PB7100 User’s Manual 2. Image Menu FUNCTION Auto Resize DESCRIPTION Makes the best fit of the image to the screen, 1. On 2. Off 3. 16:9 *This function is available only when the input mode is PC . Ratio Users have 2 options for the image ratio. 1. 4 : 3 2. 16 : 9 *This function is available when the input mode is YPbPr, Video or SVideo. Adjusts the horizontal position of the projected image. H Position *This function is available only when the input mode is PC.
BenQ PB7200/ PB7220/ PB7100 User’s Manual 3. Source Menu FUNCTION Mirror Source Scan DESCRIPTION 1. Default 2. Ceiling mounted projection 3. Rear screen projection 4. Ceiling mounted and rearscreen projection Shows the input source from among RGB-1, RGB-2, YPbPr, S-Video and Video when several sources are available. Adjusts the volume level.
BenQ PB7200/ PB7220/ PB7100 User’s Manual 4. Control Menu FUNCTION Language OSD Setup Economic Mode Reset Lamp Hour DESCRIPTION Language sets the language for the OSD control menus. Use the 3 / 4 key to select the desired language from among English, French, German, Italian, Spanish, Korean, Traditional Chinese and Simplified Chinese. OSD Pos. Selects a desired OSD position. OSD Time Sets the length of time the OSD will remain active after the last time you pressed the button.
BenQ PB7200/ PB7220/ PB7100 User’s Manual 5. PIP Menu These functions are available only when the input mode is PC and the PIP source is Video or S-Video. FUNCTION PIP Source DESCRIPTION Selects the source for the PIP. Enables use of the 3 / 4 key to scroll through the four alternatives: Off, Small, Medium, Large. PIP Size PIP-Source PIP-Pos PIP-Size Selects a desired position for the PIP. PIP-Source PIP-Pos PIP-Size PIP Position H Position Adjusts the horizontal position of the PIP image.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Shutdown 1. Press and hold POWER and a warning message will appear. To turn off the projector, press and hold POWER again. Projector Remote Control 2. The fan will continue to run for approximately 90 seconds. 3. Turn off the main power switch. 4. Disconnect the power cord from the wall socket. Caution Please do not unplug the power cord before POWER is shut down or during the 90-second cooling process.
BenQ PB7200/ PB7220/ PB7100 User’s Manual MAINTENANCE Lamp Information Use and Replacement of the Lamp When the Lamp Indicator lights up red or a message appears suggesting the time of lamp replacement, please install a new lamp or consult your dealer. An old lamp could cause a malfunction in the projector and in rare instances may even break. For more detailed information, please refer to "LED Indicator Status & Illustration" on page 24.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Step 1. Turn off the projector. Disconnect the power cord from the outlet and the projector. Step 2. Loosen the screw and remove the lamp cover. If the lamp is hot, avoid burns by waiting 45 minutes until the lamp has cooled. Step 2 Step 3. Loosen the 3 screws. (It is strongly recommended that you use a magnetic-head screwdriver.) Pull the handle to remove the lamp housing. If the screws are not loosened completely, they could injure your fingers.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Resetting Lamp Hours If you replace the lamp after 2000 hours of operation, please follow the instructions below within 10 minutes of powering on. OSD FUNCTION Press and hold the Exit button on the projector for 3 seconds to display the total used lamp time. • • Press the MENU button on the projector during the lamp hour message. An adjustment message will appear. Press W or X to reset lamp hours or press EXIT to leave.
BenQ PB7200/ PB7220/ PB7100 User’s Manual LED Status & Description Power Temp Lamp Power events Power switch on O O O O - - O - - G - - O - - G - - Power-up cooling. Projector cooling system will auto-cool for 90 seconds when power was abnormal shutdown without cooling and power on again within hours. Stand-by Lamp LED is blinking during powering up. Power-down cooling for 90 seconds after power has been turned off.
BenQ PB7200/ PB7220/ PB7100 User’s Manual 26 G R - G R G G R G - R - - R G - R G Maintenance Thermal sensor 1 over-temperature, projector will auto shutdown. If you return on the power, and projector shutdown again. Please contact your dealer. Thermal sensor 2 over-temperature, projector will auto shutdown. If you return on the power, and projector shutdown again. Please contact your dealer. Thermal sensor 3 over-temperature, projector will auto shutdown.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Service Information Accessories (included in the standard package) Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part Number Signal cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J0508.502 Video cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J1303.501 S-Video cable . . . . . . . . . . . . . . . . . .
BenQ PB7200/ PB7220/ PB7100 User’s Manual TROUBLESHOOTING Common Problems & Solutions NO POWER Try these solutions: • Make sure the power cord is inserted snuged into the AC adapter socket. • Make sure the power cord is inserted snuged into the power outlet. • Toggle the power switch to the position “1”. • Wait two minutes after the projector is turned off before turning the projector back on. NO PICTURE Try these solutions: • Check for the proper input source. • Ensure all cables are connected properly.
BenQ PB7200/ PB7220/ PB7100 User’s Manual REMOTE CONTROL DOES NOT WORK Try these solutions: • Replace the batteries with new ones. • Make sure there is no obstacle between the remote control and the projector. • Stand within 6 meters (19.5 feet) of the projector. • Make sure nothing is blocking the front and rear receivers. Status Messages On-Screen Messages Description SEARCHING Projector is searching for input.
BenQ PB7200/ PB7220/ PB7100 User’s Manual SPECIFICATIONS Projector Specifications Technical Specifications Note: All specifications are subject to change without notice. General Product name Personal Projector Model name PB7200 1024X768 XGA PB7220 1024X768 XGA PB7100 800X600 SVGA Optical Display system 1-CHIP DMD Lens F/Number F/2.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Timing Chart Resolution H Sync (kHz) V Sync (Hz) Remark 640x350 31.5 70.1 640x400 37.9 85.1 720x400 31.5 70.0 720x400 37.9 85.1 VESA 640x480 31.5 60.0 VESA 640x480 37.9 72.8 VESA 640x480 35 66.7 Macintosh 640x480 43.3 85.0 VESA 800x600 35.2 56.3 VESA 800x600 37.9 60.3 VESA 800x600 46.9 75.0 VESA 800x600 48.1 72.2 VESA 800x600 53.7 85.1 VESA 832x624 49.7 74.5 Macintosh 1024x768 48.4 60.0 VESA 1024x768 56.
BenQ PB7200/ PB7220/ PB7100 User’s Manual DIMENSIONS Unit: mm 32 Dimensions
BenQ PB7200/ PB7220/ PB7100 User’s Manual WARRANTY Limited Warranty BENQ warrants this product against any defects in material and workmanship, under normal usage and storage. Exclusion to Warranty: The lamps are considered a consumable item and are warranted for 90 days or 500 hours, whichever occurs first. Proof of purchase date will be required with any warranty claim.
BenQ PB7200/ PB7220/ PB7100 User’s Manual SAFETY REGULATIONS FCC Statement CLASS A: This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications.
