User`s manual

Introduction10

Adjusts the size of the image.

Rotate clockwise to enlarge the image or rotate counter-clockwise to make the image

smaller.

13. Focus ring (Refer to "Fine-tuning the image size and clarity" on page 24 for more

information.)

Adjusts the focus of the projected image.

Remote control

1. Power (Refer to "Start up" on page 22 and "Shutdown" on page 27 for more infor-

mation.)

Turns the projector on or off.

2. Freeze

The image is frozen when Freeze is pressed. An icon " " will display in the lower

right corner of the screen. To release the function, press Freeze again.

3. 5Up, 6 Down

4. 3Left / Right4,

5. Menu (Refer to "Using the menus" on page 29 for more information.)

Used to select the desired menu items and to make adjustments.

6. Keystone (Refer to "Correcting keystone" on page 25 for more information.)

Manually corrects distorted images resulting from an angled projection.

7. Page Up and Down

Connect the projector to your PC or notebook with a USB cable prior to using this

function. For example, you can operate a Microsoft® PowerPoint® presentation

moving forwards and backwards.

8. Auto (Refer to "Auto-adjusting the image" on page 24 for more information.)

Automatically determines the best picture timings for the displayed image.

9. Source (Refer to "Switching input signal" on page 26 for more information.)

Sequentially selects the input signal RGB, Component Video,

S-Video or Video.