User`s manual

Maintenance 21
Maintenance
Lamp Information
Use and Replacement of Lamp
When the Lamp Indicator lights up red or a message appears to suggest the time of lamp
replacement, please install a new lamp or consult your dealer. An old lamp could cause a
malfunction in the projector and may explode.
LED Status Indicators
The LAMP indicator will light up if the lamp becomes too hot. Turn off the power and let the
projector cool for 45 minutes. If the LAMP indicator is still red when turning the power on,
please contact your dealer.
Lamp Life Indicators
When this LED shows red continuously, it is warning you
that the lamp life has exceeded 2000 hours. Replace the pro-
jection lamp with a new one immediately.
CHANGE THE LAMP,
AND RESET THE
LAMP TIMER
The lamp has been in operation for 1900 hours. Change a
new lamp for optimal performance.
CHANGE THE LAMP.
THE POWER WILL
TURN OFF AFTER 20
HOURS
The lamp has been in operation for 1980 hours, and the
power will turn off after 20 hours.
CHANGE THE LAMP!
The lamp has been in operation for over 2000 hours. The
warning message will display for 30 seconds every 5 minutes
after you turn on the projector and the power will turn off
automatically in 10 minutes.
Lamp is not properly
attached
LED blinks rapidly.
Tem p er a tu re i s to o h i g h
When the projector’s internal temperature is too high to
operate safely, the LED blinks slowly for one minute and the
lamp turns off automatically.
If the LED light is off, the projector’s lamp and temperature
are operating under normal conditions.
Downloaded From projector-manual.com BenQ Manuals