User`s manual

Introduction 9
Remote Control Effective Range
The remote sensors are located on the front and the back of the projector. It can function in
a range of 30 degrees horizontally and 30 degrees vertically relative to a line that is a right
angle to the remote sensors. The distance between the remote control and the remote sen-
sors must be shorter than 6 meters (19.5 feet).
Remote Control Features
FREEZE
The image can be frozen when FREEZE is
pressed. An icon will appear in the
lower right corner of the screen for three
seconds. To release the freeze function,
press the FREEZE button, RETURN button
or SOURCE button (when the input source
is switched over during display) again. A
“Play” icon will appear in the lower right
corner of the screen for three seconds when
the freeze function is released.
ZOOM IN/OUT
By pressing ZOOM
+, the center of the
picture will be magnified. When the + but-
ton is pressed again, the picture is further
magnified, up to four times the original
size. By pressing ZOOM
―, the size of the
image is reduced. When the - button is
pressed again, the picture is further reduced
until it is restored to its original size. To
return to the normal display mode, press
the RETURN button. (This function can be
used in combination with FREEZE. )
Downloaded From projector-manual.com BenQ Manuals