User`s manual

12 Startup
Startup
StartupStartup
Startup
First time startup
After you have installed the battery and finished charging it, you are ready to power ON
your PDA phone. The first time you power ON the phone, you will be guided through a
series of setup screens. Follow the steps below to start up your phone and complete the
initial setup.
1. With the battery lock in the lock position, press the power button to power ON the
phone.
2. Wait for the phone to boot up with the BenQ splash screen accompanied by the wel-
come sound.
2. On the Windows Mobile screen, tap the stylus anywhere on the screen to proceed.
3. On the ‘align screen’, aim and tap the stylus precisely on the cross-hair object. The
cross-hair object will move around the screen several times until the screen is aligned.
Each time the cross-hair object moves to a new location, aim and tap on it.
4. Tap ‘Next’ to move to the next screen.
5. Tap and hold the 9 A.M. time slot to bring up a pop-up menu. Select ‘Cut’ from the
pop-up menu.
6. Tap and hold the 11 A.M. time slot to bring up a pop-up menu. Select ‘Paste’ from the
pop-up menu. Tap ‘Next’ to continue.
7. Select the time zone of your local area and tap ‘Next’.
8. Tap anywhere on the final screen to exit setup.
Using the stylus
The stylus works like a mouse to a PC. You can use the stylus to point and click various
objects on the screen. The following are basic stylus techniques you should learn in order
to efficiently operate your PDA phone.
• Tap
Ta pTa p
Tap - Touch the screen once with the stylus to open items and select options.