User Guide
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Adjusting the projected image
- Using the menus
- Securing the projector
- Switching input signal
- Magnifying and searching for details
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Remote paging operations
- Freezing the image
- Hiding the image
- Locking control keys
- Operating in a high altitude environment
- Adjusting the sound
- Using the test pattern
- Using the teaching templates
- Presenting from a USB Reader
- Shutting down the projector
- Direct power off
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Operation 37
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type
selected and the projector model you are using.
Main menu Sub-menu Options
1.
DISPLAY
Wall Color
Off/Light Yellow/Pink/Light
Green/Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16:10
Keystone
Position
Phase
H. Size
Digital Zoom
3D
3D Mode
Auto/Top Bottom/Frame
Sequential/Frame Packing/Side by
Side/Off
3D Sync Invert Disable/Invert
Teaching
Template
Blackboard
Off/Letter Formation/Worksheet/
Coordinate Chart
Whiteboard
Off/Letter Formation/Worksheet/
Coordinate Chart
2.
PICTURE
Picture Mode
Dynamic/Presentation/sRGB/Cinema/3D/User 1/
User 2
Reference Mode Dynamic/Presentation/sRGB/Cinema/3D
Brightness
Contrast
Color
Tint
Sharpness
Brilliant Color On/Off
Color Temperature Cool/Normal/Warm
Color Temperature Fine Tuning
R Gain/G Gain/B Gain/R Offset/G
Offset/B Offset
3D Color
Management
Primary Color R/G/B/C/M/Y
Hue
Saturation
Gain
Reset Picture Setting Current/All/Cancel
3.
SOURCE
Quick Auto Search On/Off
Color Space Conversion Auto/RGB/YUV