Service manual

7.7 Assemble “PL Lens” and lock with screws well (Fig. 7-6).

i. Assemble Lens and the Assembly direction must be horizontal, and do not impact CM.

ii. Pre-fastening Screws firstly and Fastening the Screws well. (Fig. 7-6)

Fig.7-6

7.8 Assemble “Ring Zoom” and lock with screws well (Fig. 7-7).

Fig. 7-7

Note: When assembling “Ring Zoom”, please set screwdriver torque at 1.2-1.7kg-cm and make sure

there is a gap between “Ring Zoom” and screws.

M2*3L Screw

Screw*3

Keep a gap between Ring Zoom and screw

Lens

Screw

Ring Zo