Service manual

9
Use the same mounting as current shipping projectors.
5.8 Screws
All color of screws should similar with the plastic color which
close it.
5.9 During PVT stage, limited sample
of color and texture should be
approved by BenQ industrial
designer and mechanical
engineer.
N/A
6. Packaging
6.1 Box Dimension
Refer to packing description (Internal :Refer to B405
document)
6.2 Net Weight (Esti.)
<2.9kg
6.3 Gross Weight (Esti.)
< 3.85 kg (Including Acce
ssories, Projector)
6.4 Container Loading (40')
Refer to packing description (Internal :Refer to B405
document)
6.5 Container Loading (20')
Refer to packing description (Internal :Refer to B405
document)
6.6 Packaging Conceptual
Refer to packing descri
ption (Internal :Refer to B405
document)
6.7 Container Layout
Refer to packing description (Internal :Refer to B405
document)
6.8 Cushion Orientation
Refer to packing description (Internal :Refer to B405
document)
6.9
Cushion Material
EPE
6.10
Box Comp
ression Test
N/A
6.11
Carton Artwork
Refer Packing Description and Appearance Description
7. Thermal Specification
Mechanical component temperature at ambience 0~40

7.1 Surface held or touched for short
periods
Normal surface:
Metal< 60  Plastic< 85 
Bottom surface @25
Metal< 55

Plastic< 70

7.2 Surface which my be touched
Metal
Plastic
< 70

< 95

7.3 Exhaust Air
< 95

7.4 Audible Noise Level
Typical
Normal mode: 33dBA @ 25°C(table center)
Eco mode: 30dBA @ 25°C(table center)
Max.
Nor
mal mode: 35dBA @ 25°C(table center)
Eco mode: 32dBA @ 25°C(table center)
7.5 Fan Numbers
4
8.0 Power Requirements
8.1 Power Supply (Normal)
VAC 100 ~ 240 (50/60Hz)
8.2 Power consumption
Max.
375W
Standby
0.5W Max. at 100 ~ 240VAC
(disable loop through, LAN control function,
Pixelwork function and Audio out)
Normal
Typical 353W@110Vac
ECO
Typical 292W@110Vac
ECO Blank
Minimum 150W@110Vac
8.3 Power Connector
IEC 60320 C14
8.4 Power Switch
No
9.0 Compatibility