Service manual

88
Fig.7-2
7.4 Assemble Thermal Pad & Gasket Hest-sink then place contact DMD (Fig. 7-3, 7-3-1~2).
1.>Press center of Heatsink before assemble spring screw.
then keeps press until spring screw assembly finish.
2.>Pre-fastening Sequence: [ 1 ] - [ 2 ] - [ 3 ] - [ 4 ].
3.>Fastening Sequence: [ 2 ] - [ 1 ] - [ 4 ] - [ 3 ].
4.>Screw Torque must be confirmed to be 6 kg-cm.
Fig. 7-3 Fig. 7-3-1
Fig. 7-3-2
Fixed holes of DMD
EMI Gasket
Spring Screw
○ 1
○ 2
○ 3
○
4
Pres
s Heatsink when
assemble spring screw