Service manual

6
3. Product Overview
3. Product Overview3. Product Overview
3. Product Overview
The projector consists of DLP projector controller, Lamp controller, Power supply system, and
System cooling controller. The DLP controller captures digital PC data and video data and then
converts them into the DMD display device. The Lamp controller dominates the lamp’s power and
synchronizes its frequency with color display sequence. The Power supply unit controls the AC line
power factor and converts primary voltage to secondary low voltages for digital board. The System
cooling controller drives the airflow to quench the lamp’s heat and electrical component’s heat.
 Specification Overview
Specification OverviewSpecification Overview
Specification Overview
1.0 Panel Information
2.0 Projection Lens Specification
3.0 Optical Specification
4.0 Lamp Specification
5.0 Mechanical Specification
6.0 Packaging
7.0 Thermal Specification
8.0 Power Requirements
9.0 Compatibility
10.0 User Interface
11.0 Regulatory
12.0 Reliability
13.0 Other Feature
 Input / Output Connectors
Input / Output ConnectorsInput / Output Connectors
Input / Output Connectors
1. Input Terminals
2. Output Terminals
3. Control Terminals and Interface
 Accessories
AccessoriesAccessories
Accessories
 Environmental
EnvironmentalEnvironmental
Environmental
 Electrical Specification
Electrical SpecificationElectrical Specification
Electrical Specification
 Power Supply Specification
Power Supply SpecificationPower Supply Specification
Power Supply Specification
 UI Specification
UI SpecificationUI Specification
UI Specification