Service manual

12
2. The lamp power will back to original mode power
13.10 Smart ECO*
1. When
the Smart ECO Mode is activated, lamp power will be
changed automatically in the range of 100% ~ 70%
(240W~170W) power based upon the input content.
2. When user press this key on remote, the "Lamp Settings"
OSD will be pop
-
up.
13.11 Off-line cooling
NA
14.0 Green Eco Design
14.1BenQ ecoFACTS
Refer to BenQ ecoFACTS Checking list
“* *”
1. These mode only can operation after 3 min from start-up or recovery operation.
2. To dim the lamp power at Lamp Dimmest Power (follow Lamp Capability) is limited in 30mins
duration and needs to go to Eco power 6 mins obligatory and automatically. After 6min, lamp will
dim to Lamp Dimmest Power (follow Lamp Capability) continue.
3. Lamp power from one mode to another mode need around 10 sec to stabilize power
 Input / Ou
Input / OuInput / Ou
Input / Output Connectors
tput Connectorstput Connectors
tput Connectors
1.Input Terminals
1.1 Computer Input
-
1
RGB DB
-
15 x 1 (Female Type)
1.2 Computer Input
-
2
RGB DB
-
15x 1 (Female Type)
1.3 Video
Composite Video (RCA X 1)
1.4 S
-
Video
S
-
Video (Mini Din) X 1
1.5 Component
-
1
RGB DB
-
15 x 1 (Female Type)
1.6 Component
-
2
RGB DB
-
15 x 1 (Female Type)
1.7 DVI
-
1
NA
1.8 DVI
-
2
NA
1.9 HDMI Digital Video
–
1
HDMI 1.4 x1 ( HDCP )
1.9.1 Support Audio Input
YES
1.9.2 CEC control
No
1.9.3 HDMI Receive Distance
Deep color 10bit : 15m
The test HDMI cable is qualified between BenQ and Vendor
The test source instrument is 22294 (HDCP is off)
The test source instrument is PS3 (HDCP is on)
1.10 HDMI Digital Video
–
2
NA
1.10.1 Support Audio Input
NA
1.10.2 CEC control
NA
1.11 Audio Input
–
1 (RCA R &L)
RCA A
udio Jack right and left
1.11.1 Related Source
Video/S
-
Video audio input
1.12 Audio Input – 2 (Mini Jack)
Φ3.5mm Stereo Mini-Jack x 1
1.12.1 Related Source
Computer / Component audio input
1.12.2 Input Signal Level
500mVrms 10 KΩ
1.13 Audio Input
–
3
(Mini Jack)
NA
1.13.1 Related Source
NA
1.13.2 Input Signal Level
NA
1.14 Audio Input
–
4 (Mini Jack)
NA
1.15 USB Input
Type A x1 ( USB Reader & Wireless Display )
Mini Type B x 1 (Display)
1.16 LAN Input
NA
2.Output Terminals
2.1 Computer Output
RG
B DB
-
15 x 1 (Female Type)
2.1.1 Signal Source
loop through Computer Input
-
1