Service manual

11
13.5 3D Display
Yes, support DLP 3D
13.5.1 3D test condition
For Video application
1. Screen size:160 吋
2. 3D Goggle distance : 6M
3. Content : Samsung 3D Demo
4. 3D Goggle : BenQ provide
5. Lamp mode : Eco mode
13.6 LAN
13.6.1 LAN
-
Crestron eControl
No
13.6.2 LAN
-
RoomView compatible
No
13.6.3 LAN
-
PJ Link compatible
No
13.6.4 LAN
-
AMX compatible
No
13.6.5 LAN
-
Display (1 to 1)
Wireless Lan
13.6.6 LAN over RS232
No
13.7 Certificate
13.7.1 SRS Certificate
NA
13.7.2
Win7 Certificate
Yes
13.7.3 WEEE Certificate
Yes
13.7.4 Crestron Certificate
No
13.8 WCE3.0**
1. WCE will activate, if below conditions is fulfilled:
(1)Input PC Source,
(2)Dynamic mode,
(3)Normal Lamp Power
(4)RGB level <5% and last for 10 second
The lamp power will dim to Lamp Dimmest Power (follow
Lamp Capability).
13.9 Screen Savor Mode**
(Eco Blank & Lamp Saver)
Turn on Eco Blank:
1. When user presses the button once, the image would turn
to Eco Blank mode and show "Eco Blank" and other words
in the bottom of screen.
2.
The lamp power will dim to Lamp Dimmest Power (follow
Lamp Capability).
Turn off Eco Blank:
1. When the image is in Eco Blank mode and user done:
(1) Press any Keypad
(2) Press IR
The projector would turn off Eco Blank mode
2. The lamp power will back to original mode power
Turn on Lamp Saver:
1. When there is no signal input and didn’t do any projector
operation last to 3 mins, a full black pattern will be
displayed with “No single” and other message
2. The lamp power will dim to Lamp Dimmest Power (follow
Lamp Capability).
Turn off Lamp Saver:
1. When the image is in Lamp Saver mode and user done:
(1) Press any Keypad
(2) Input Signal
(3)
Press IR
The projector would turn off Lamp Saver mode