Operation Manual

Operation 23
projector to correct keystoning at the right side of the image. Press on the
projector to correct keystoning at the left side of the image.
Adjusting Corner Fit
Manually adjust four corners of the image by setting the horizontal and vertical values.
1. Press MENU/EXIT and then press / until the DISPLAY menu is highlighted.
2. Press to highlight Corner Fit and press
MODE/ENTER. The Corner Fit correction
page displays.
3. Press / / / to select one corner and
press MODE/ENTER.
4. Press / to adjust vertical values.
5. Press / to adjust horizontal values.
Corner Fit and 2D Keystone Adjustment Notice
The corner fit function is closely related to the 2D keystone function as both make
adjustments to correct picture distortion. Therefore, when correcting picture distortion,
both corner fit and 2D keystone functions should be used in conjunction to achieve the
best picture shape.
To achieve the best picture shape:
• When installing the projector, align the projector to the screen so they are as
perpendicular to each other as possible in order to minimize picture distortion.
• When making corner fit adjustments, if the desired effect cannot be achieved, adjust
the 2D keystone value and try again.
• When making 2D keystone adjustments, if the desired effect cannot be achieved, adjust
the corner fit value and try again.
Corner Fit
Enter
Back
Corner Fit
Reset
Back