Operation Manual

Positioning your projector 17
MW883UST
The screen aspect ratio is 16:10 and the projected picture is in a 16:10 aspect ratio
All measurements are approximate and may vary from the actual sizes.
BenQ recommends that if you intend to permanently install the projector, you should physically test the
projection size and distance using the actual projector in situ before you permanently install it, so as to make
allowance for this projector's optical characteristics. This will help you determine the exact mounting position
so that it best suits your installation location.
Screen size
Min
Ceiling
height
Ver t ic a l
offset
Installation distance (D)
Diagonal
(M)
Height
(h)
Weight
(W)
H
a
a. base on an image 762 mm from the floor, if the image is lower, the min ceiling height is reduced by the
measurement.
V
X
b
=0 mm
(D=a)
b. Assume the thickness of projection screen(X) is 0 mm.
X
c
=30 mm
(D=a+30 mm)
c. Assume the thickness of projection screen(X) is 30 mm.
Inch mm (mm) (mm) (mm) (mm) (mm) (mm)
86.5 2197 1164 1863 2430 216 88 118
87 2210 1171 1874 2438 217 91 121
90 2286 1212 1939 2485 223 106 136
95 2413 1279 2046 2562 233 131 161
100 2540 1346 2154 2639 243 156 186
105 2667 1414 2262 2717 253 181 211
110 2794 1481 2369 2794 263 206 236
115 2921 1548 2477 2872 273 231 261
120 3048 1615 2585 2949 284 256 286
125 3175 1683 2692 3026 294 281 311
130 3302 1750 2800 3104 304 306 336