Operation Manual

Operation
40
Setting the presentation timer
The presentation timer can indicate the
presentation time on the screen to help you
achieve better time management when giving
presentations. Follow these steps to utilize this
function:
1. Press Timer Set up on the remote control
or go to the SYSTEM SETUP: Basic >
Presentation Timer menu and press
MODE/ENTER to display the
Presentation Timer page.
2. Highlight Timer Period and decide the timer period by pressing / . The
length of time can be set from 1 to 5 minutes in 1-minute increments and 5 to
240 minutes in 5-minute increments.
3. Press to highlight Timer Display and choose if you want the timer to show
up on the screen by press
ing / .
4. Press to highlight Timer Position and set the timer position by pressing
/
.
Top-Left Bottom-Left Top-Right Bottom-Right
5. Press to highlight Timer Counting Direction and select your desired
counting direction by pressing /
.
6. To activate the presentation timer, press and press / to select On and
press MODE/ENTER.
7. A confirmation message displays. Highlight Yes and press MODE/ENTER to
confirm. You will see the message “Timer is On” displaying on the screen. The
timer starts counting at the time the timer is on.
Selection Description
Always Displays the timer on screen throughout the presentation time.
3 min/2 min/1
min
Displays the timer on screen in the last 3/2/1 minute(s).
Never Hides the timer throughout the presentation time.
Selection Description
Count Up Increases from 0 to the preset time.
Count Down Decrease from the preset time to 0.