Operation Manual

Introduction 13
Remote control
1. Info
Showing the status information of the
projector.
2. Menu/Exit
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
See "Using the menus" on page 30 for details.
3. Left/ Right
When the On-Screen Display (OSD) menu
is activated, the #3 and #12 keys are used
as directional arrows to select the desired
menu items and to make adjustments. See
"Using the menus" on page 30 for details.
4. Mode/Enter
Selects an available picture setup mode.
See "Selecting a picture mode" on page
36 for details.
Activates the selected On-Screen
Display (OSD) menu item. See "Using
the menus" on page 30 for details.
5. Eco Blank
Press the Eco Blank button to turn off
the image for a period of time with 70%
lamp power saving. Press again to
restore the image. See "Hiding the
image" on page 42 for details.
6. SmartEco
Displays the lamp mode selection
bar(Normal/Economic/SmartEco/
LampSave).
7. Aspect
Selects the display aspect ratio. See
"About the aspect ratio" on page 35 for
details.
8. Digital Zoom keys (+, -)
Magnifies or reduces the projected
picture size. See "Magnifying and
searching for details" on page 34 for
details.
9. Timer On
Activates or displays an on-screen timer
based on your own timer setting. See
"Setting the presentation timer" on page
40 for details.
10. Timer Setup
Enters presentation timer setting
directly. See "Setting the presentation
timer" on page 40 for details.
11. Power
Toggles the projector between standby
mode and on. See "Starting up the
projector" on page 26 and "Shutting
down the projector" on page 46 for
details.
1
12
2
4
16
8
15
9
14
3
11
10
6
13
5
7
3
17
18
19
20
21
22
12
I
I