User Guide
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Adjusting the projected image
- Using the menus
- Securing the projector
- Switching input signal
- Magnifying and searching for details
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Remote paging operations
- Hiding the image
- Freezing the image
- Operating in a high altitude environment
- Adjusting the sound
- Personalizing the projector menu display
- Select the lamp saver mode
- Shutting down the projector
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Maintenance
66
Indicators
Light Status & Description
POWER TEMP LAMP
System Message
Orange Off Off Stand-by mode
Green
Flashing
Off Off Powering up
Green Off Off Normal operation
Orange
Flashing
Off Off Normal power-down cooling
Red
Flashing
Red
Flashing
Red
Flashing
Download
Green Off Red CW start fail
Burn-In Messages
Green Off Off Burn-in ON
Green Green Green Burn-in OFF
Lamp Error Messages
Off Off Red Lamp1 error in normal operation
Off Off
Orange
Flashing
Lamp is not lit up
Thermal Error Messages
Red Red Off
Fan 1 error (the actual fan speed is outside the
desired speed)
Red
Red
Flashing
Off
Fan 2 error (the actual fan speed is outside the
desired speed)
Green Red Off Temperature 1 error (over limited temperature)
Green
Red
Flashing
Off Thermal Sensor 1 open error
Green Green Off Thermal Sensor 1 short error
Green
Flashing
Green
Flashing
Off Thermal IC #1 I2C Connection error