User Guide
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Adjusting the projected image
- Using the menus
- Securing the projector
- Switching input signal
- Magnifying and searching for details
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Remote paging operations
- Hiding the image
- Freezing the image
- Operating in a high altitude environment
- Adjusting the sound
- Personalizing the projector menu display
- Select the lamp saver mode
- Shutting down the projector
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Operation
52
FUNCTION DESCRIPTION
Brilliant
Color
See "Adjusting Brilliant Color" on page 37 for details.
Color
Temperature
See "Selecting a Color Temperature" on page 38 for details.
Color
Temperature
Fine Tuning
See "Setting a preferred color temperature" on page 38 for
details.
3D Color
Management
See "3D Color Management" on page 38 for details.
Reset Picture
Settings
See "Resetting current or all picture modes" on page 39 for
details.
When Picture Mode is under Bright, choosing "Current" will only
reset the Bright to default value, however, choosing "All" will
reset all the Picture Mode settings to default values.
Quick Auto
Search
See "Switching input signal" on page 33 for details.
HDMI Range
Auto
Adjust HDMI RGB color space range automatically.
Full
Full Range color space. Black level: 0, white level: 255, valid range:
0~255.
Limited
Limited Range color space. Black level: 16, white level: 235, valid
range: 1~254.
Color Space
Conversion
See "Changing Color Space" on page 34 for details.
2. PICTURE menu
3. Source menu