User manual
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Adjusting the projected image
- Using the menus
- Securing the projector
- Switching input signal
- Magnifying and searching for details
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Remote paging operations
- Hiding the image
- Freezing the image
- Operating in a high altitude environment
- Adjusting the sound
- Use Teaching Template
- Personalizing the projector menu display
- Select the lamp saver mode
- Shutting down the projector
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Operation
52
FUNCTION DESCRIPTION
Brilliant
Color
See "Adjusting Brilliant Color" on page 36 for details.
Color
Temperature
See "Selecting a Color Temperature" on page 36 for details.
Color
Temperature
Fine Tuning
See "Setting a preferred color temperature" on page 37 for details.
3D Color
Management
See "3D Color Management" on page 37 for details.
Reset Picture
Setting
See "Resetting current or all picture modes" on page 38 for details.
When Picture Mode is under Dynamic, choosing "Current" will only
reset the Dynamic to default value, however, choosing "All" will reset
all the Picture Mode settings to default values.
Quick Auto
Search
See "Switching input signal" on page 32 for details.
Color Space
Conversion
See "Changing Color Space" on page 32 for details.
2. PICTURE menu
3. SOURCE menu