User manual
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Adjusting the projected image
- Using the menus
- Securing the projector
- Switching input signal
- Magnifying and searching for details
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Remote paging operations
- Hiding the image
- Freezing the image
- Operating in a high altitude environment
- Adjusting the sound
- Use Teaching Template
- Personalizing the projector menu display
- Select the lamp saver mode
- Shutting down the projector
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Operation
46
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type
selected.
Main menu Sub-menu Options
1.
DISPLAY
Wall Color
Off/Light Yellow/Pink/Light Green/
Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16:10
Keystone
Position
Phase
H. Size
Digital Zoom
3D
3D mode
Auto/Top Bottom/Frame sequential/
Frame packing/Side by side/Off
3D Sync Invert Disable/Invert
Te a c h i n g Te mp l a t e
Blackboard
Off/Letter Formation/Worksheet/
Coordinate Chart
Whiteboard
Off/Letter Formation/Worksheet/
Coordinate Chart
2.
PICTURE
Picture Mode Dynamic/Presentation/sRGB/Cinema/(3D)/User 1/User 2
Reference Mode Dynamic/Presentation/sRGB/Cinema/(3D)
Brightness
Contrast
Color
Tint
Sharpness
Brilliant Color On/Off
Color
Temperature
Cool/Normal/Warm
Color
Temperature Fine
Tuning
R Gain/G Gain/B Gain/R Offset/G
Offset/B Offset
3D Color
Management
Primary Color R/G/B/C/M/Y
Hue
Saturation
Gain
Reset picture
settings
Current/All/Cancel
3. SOURCE
Quick Auto Search On/Off
Color Space Conversion Auto/RGB/YUV