Operation Manual

45
3.6.4 White Balance
Set the white balance when shooting photos under specific lighting
conditions.
1. In Camera mode, touch to enter the Camera menu.
2. Touch White Balance to enter the menu. You can also press
W/X to select White Balance and press OK to enter its menu.
3. Touch an option to select the desired setting. You can also press
W/X to select the desired setting and press OK to confirm.
• Auto: Set the white balance automatically.
• Incandescent: Indoor under tungsten lighting condition.
• Sunny: Bright daylight shooting.
• Cloudy: Cloudy day or shady condition.
• Fluorescent: Indoor under fluorescent lighting.
• Preset: Manually adjust the white balance.
3.6.5 AE Meter
Select the metering method for calculating the exposure.
1. In Camera mode, touch to enter the Camera menu.
2. Touch AE meter to enter the menu. You can also press W/X to
select AE meter and press OK to enter its menu.
3. Touch an option to select the desired setting. You can also press
W/X to select the desired setting and press OK to confirm.
• Average: Calculate exposure based on the entire image area.
• Center: Calculate exposure based on the entire image area, but
provides greater exposure to the center of a subject.
• Spot: Calculate exposure based on the small portion of the
screen center.