Operation Manual

31
3.2.4 Motion Detection
With Motion Detection feature, the video recording automatically starts if
the digital video camera detects any movement.
3. In Video mode, touch to enter the Video menu.
4. Touch Motion Detection to enter the menu. You can also press
W/X to select Motion Detection and press OK to enter its menu.
5. Touch the option to select On or Off. You can also press W/X to
select On or Off and press OK to confirm.
Note: If Motion Detection is enabled, Time Lapse and Pre-recording will be disabled.
3.2.5 White Balance
Set the white balance when recording videos under specific lighting
conditions.
1. In Video mode, touch to enter the Video menu.
2. Touch White Balance to enter the menu. You can also press
W/X to select White Balance and press OK to enter its menu.
3. Touch an option to select the desired setting. You can also press
W/X to select the desired setting and press OK to confirm.
• Auto: Set the white balance automatically.
• Incandescent: Indoor under tungsten lighting condition.
• Sunny: Bright daylight shooting.
• Cloudy: Cloudy day or shady condition.
• Fluorescent: Indoor under fluorescent lighting.
• Preset: Manually adjust the white balance.