M32 Digital Camcorder User Manual Downloaded From VideoCamera-Manual.
Downloaded From VideoCamera-Manual.
Table of Contents 1 2 Overall Introduction ........................... 15 1.1 1.2 1.3 System Requirements ........................................ 15 Features .............................................................. 15 Digital Video Camera & Accessories ................. 16 1.4 1.5 External View ..................................................... 17 Adjusting LCD Display ...................................... 18 Getting Started ................................... 19 2.1 2.2 2.
Using the Camera ............................... 33 4.1 4.2 4.3 4.4 Shooting a Movie Clip....................................... 33 Pause Recording a Movie Clip .......................... 33 Shooting a photo ............................................... 33 Voice Recording Mode ...................................... 33 4.5 Movie Clip / Voice Clip Playback ...................... 34 4.6 Shooting / Playback Photos .............................. 36 4.6.1 Shooting Photos....................................
6.1.11 6.1.12 6.1.13 6.1.14 6.1.15 6.1.16 EV Compensation ....................................... 47 Backlight...................................................... 48 Contrast ..................................................... 48 Sharpness .................................................... 49 Motion Detection ....................................... 49 Slow Motion Video...................................... 51 6.2 Menu Options of Movie Clip/Voice Playback . 52 6.2.1 File Protection ..................
.4.1 File Protection ............................................ 62 6.4.2 Slide Show Setting....................................... 62 6.4.3 Slide Show Effect......................................... 63 6.4.4 Delete ......................................................... 63 6.4.5 DPOF .......................................................... 64 6.4.6 Rotate ......................................................... 64 6.5 Setting Menu ..................................................... 65 6.5.
8 Installing the Software ....................... 72 9 Editing Software.................................. 73 10 Appendix.............................................. 74 Specifications ............................................................... 74 Troubleshooting ........................................................... 76 5 Downloaded From VideoCamera-Manual.
Preface Congratulations on your purchase of this advanced camcorder (digital video camera). Ensure that you read this manual carefully and keep it in a safe place for future reference. About This Manual This manual is designed to assist you in using your new camcorder. All information presented is as accurate as possible but is subject to change without notice. Copyright Copyright 2012 by BenQ Corporation. All rights reserved.
Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union. Battery This symbol on the product or on the packaging indicates that this can not be disposed of as household waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery.
CE Regulatory Notice We, Name: BenQ Europe B.V.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Warning and Notice Before operating the camcorder, please make sure that you read and fully understand the content in this section. If you ignore and violate all safety warning notices indicated in this section, the camcorder warranty may be void. Meanwhile, not only the camcorder but also you and all other people and things around you may be severely damaged, injured, or even placed in danger of death. For your safety 1. Do not attempt to charge any other battery with this camcorder. 2.
9. To prevent electric shock, do not attempt to disassemble or repair your camcorder by yourself. 10. Some camcorder models accept non-rechargeable batteries. When using these batteries, do not charge them. Otherwise, dangers such as explosion and fire may occur. Warranty 1.
9. Finger grease may be left on the camcorder lens and will result in unclear images or videos. To avoid this problem, be sure to clean the camcorder lens before taking pictures or recording videos. You should also clean the camcorder lens on a regular basis. 10. If the lens is dirty, use a lens brush or soft cloth to clean the lens. 11. Do not touch the lens with your fingers. 12.
2. Do not use your camcorder outdoors when it is raining or snowing. 3. Do not use your camcorder in or near water. 4. The camcorder operating temperature is between 0 and 40 degrees Celsius. It is normal for the operating time to be shortened when the temperature is low. 5. The capacity of your camcorder batteries will reduce each time it is charged/emptied. 6. Storage at too high or low temperatures will also result in a gradual capacity loss.
BenQ ecoFACTS BenQ has been dedicated to the design and development of greener product as part of its aspiration to realize the ideal of the "Bringing Enjoyment 'N Quality to Life" corporate vision with the ultimate goal to achieve a low-carbon society.
1 Overall Introduction Please read this chapter to understand the features and functions of this Digital Video Camera. This chapter also includes the description of system requirement, package contents, and hardware components. 1.1 System Requirements This Digital Video Camera requires a unit of computer with the following specifications: • Windows® XP/Vista/7 operating system or Mac OS 10.3 ~10.4 • A CPU of at least the equivalent of Intel® Pentium 4 2.8GHz I • At least 512 MB of RAM • Standard USB 1.
1.3 Digital Video Camera & Accessories This package should contain the following items. In case there is any missing or damaged item, please contact your dealer immediately. 1. Digital video camera 2. Quick Guide 3. Software CD 4. HDMI cable 5. AV cable 6. USB cable 7. Lithium-Ion battery 8. Adaptor 9. Hand Strap 10. Pouch Note: Available accessories depend on the actual items shipped and may vary from the list above. 16 Downloaded From VideoCamera-Manual.
1.4 External View 11 12 13 14 15 1 2 3 4 5 Lens Flash Light Self-timer Indicator LED Indicator Mode Button 6 Recording Button 16 7 8 9 10 USB/HDMI/TV/Audio Output Status Display Speaker Zoom Button 17 18 19 Shutter Button Playback Button Power Button OK Button Menu Button Battery / Memory Card Compartment Tripod socket Hand Strap Microphone 17 Downloaded From VideoCamera-Manual.
1.5 Adjusting LCD Display Before taking pictures or recording movie clips, please rotate according to the illustrations below. 18 Downloaded From VideoCamera-Manual.
2 Getting Started 2.1 Inserting SD Card 1. Insert an SD card and make sure facing the touching face downward. Note: Do not remove or insert an SD card when the power of the Digital Video Camera is on to avoid damaging files. 19 Downloaded From VideoCamera-Manual.
2.2 Loading the Battery Please use only the battery provided or recommended by the manufacturer or dealer. Note: Insert the battery correctly according to this description. Error in inserting the battery could result in non-repairable damage to this Digital Video Camera. 1. Open battery cover. 2. Insert the battery according to the illustration. 20 Downloaded From VideoCamera-Manual.
3. Close battery cover. Battery / Power Status Indicator: Battery full / Battery half full Battery empty The device power is supplied by DC input. (The battery is not charged.) 21 Downloaded From VideoCamera-Manual.
2.3 Charging the Battery You can use the adaptor attached to charge the Lithium-Ion battery. Insert the Lithium-Ion battery into the Digital Video Camera and connect to the cable of the adaptor. (You can also charge the battery by using the USB cable from a computer.) 22 Downloaded From VideoCamera-Manual.
2.4 The Gestures of Using the Touch Screen 2.4.1 Single touch You can touch hotkey to change settings as shown below (Take DV function as an example). z E.I.S. (Electronic Image Stabilizer): on z AF lock: on z Focus mode: (Auto Focus z / off / off / Touch AF ) Menu 23 Downloaded From VideoCamera-Manual.
2.4.2 Slide Slide right or left to view the previous file or the next file under the [Playback] Mode. 2.4.3 Rotate Under [Playback] Mode, you can rotate the image by 90°/step as shown below. 24 Downloaded From VideoCamera-Manual.
2.5 Buttons & Functions Description Button Function Power Button To turn ON/OFF the Digital Video Camera. Menu Button To display the main OSD menu. MODE Button There are three operating modes for the Digital Video Camera: DV Mode, DSC Mode, and Voice Recording Mode. Press the Mode button to switch to different modes. OK Button To confirm all settings.
Shutter Button To take images. Zoom Button This Digital Video Camera is equipped with 23X Optical Zoom: press the button Right (T) to pull in the distance of the subject, or press the button Left (W) to move away the distance from the object. Playback Button To enter Playback mode. 2.6 About LED Indicators Below table describes the meaning of the camera LED indicators: Power Indicator Color Definition Green Turning power on. Green blinking Flash is charging.
2.7 Initial Settings Before Use 2.7.1 Setting Language 1. It is automatic to move on to Language setting after setting Date/Time. 2. Press the [4-Way Direction] Button left/right or touch the screen for selection. Then press up/down for confirmation. 3. Press OK Button to confirm the setting. 27 Downloaded From VideoCamera-Manual.
2.7.2 Setting Date and Time 1. Turn [On] the Digital Video Camera to set up the date and time for the first time. Set the date and time by moving up/down button or touch the screen to select. 2. Press the [4-Way Direction] Button up left/right to select each column. Then press up/down or touch the screen to select a value. 3. Press . 28 Downloaded From VideoCamera-Manual.
3 LCD Display Information 3.1 In DV Mode Please refer to the following table. 1 Resolution indicator 2 Scene mode Indicator 3 Remaining recording time indicator 4 DV mode indicator 5 Battery status indicator 6 White balance indicator 7 Exposure compensation indicator 8 Metering mode 9 Playback button 10 Histogram indicator 29 Downloaded From VideoCamera-Manual.
11 Menu button 12 Focus mode button 13 Auto Focus button 14 E.I.S. button (On/Off) 3.2 In Voice Recording Mode Please refer to the following table. 1 Recording time left indicator 2 Voice Recording Mode indicator 3 Battery status indicator 4 Playback button 5 Menu button 30 Downloaded From VideoCamera-Manual.
3.3 In DSC Mode Please refer to the following table. 1 Resolution indicator 2 Scene Mode indicator 3 Number of pictures left 4 DSC Mode indicator 5 Battery indicator 6 White balance indicator 7 EV compensation indicator 8 Metering mode 9 Playback button 10 Histogram indicator 31 Downloaded From VideoCamera-Manual.
11 Menu button 12 Flashlight mode selection (off/auto) 13 Focus mode button 14 Self-timer indicator 15 Face Detection 16 Drive mode 32 Downloaded From VideoCamera-Manual.
4 Using the Camera 4.1 Shooting a Movie Clip 1. [DV] mode is the default setting after you power [On] the Digital Video Camera. 2. Press the [Recording] Button to start/stop recording. 3. The Digital Video Camera will store the movie clip automatically. 4.2 Pause Recording a Movie Clip 1. Press OK Button during recording a movie clip. The video will pause recording immediately. 2. Press OK Button again to start recording a movie clip. 3.
4.5 Movie Clip / Voice Clip Playback 1. In [DV]/ [DSC]/ [Voice Recording] Recording Mode, press [Playback] Button to display recently stored files on the LCD screen. Playback Movie clip playback mode Voice clip playback mode 2. Press [4-Way Direction] Button left/right to view stored files. Press OK Button to playback or touch the screen to select Playback of the file. 34 Downloaded From VideoCamera-Manual.
3. To pause the Playback of file, press the [Recording] Button or touch the screen icon . 4. Press [Playback] Button again to return to DV/DSC/Voice Recording Mode. Press [Playback] Button again to return to DV/DSC/Voice Recording Mode. 5. You can also playback the movie clip in different speeds by touching (ON/OFF) the screen icon .
6. Capture the image from movie clip playback. Press [Shutter] Button in replaying the movie clip. The Digital Video Camera will store captured still images automatically in the image size (resolution) you select (1920 x 1080, 1280 x 720, 848 x 480, or 432 x 240). 4.6 Shooting / Playback Photos 4.6.1 Shooting Photos 1. Turn [On] the power and adjust the [Mode] Button to [DSC] Mode. 2. Press [Shutter] Button to capture images which will be stored automatically. 4.6.2 Playback Photos 1.
4. Press [Playback] Button again to return to [DSC] Mode. 37 Downloaded From VideoCamera-Manual.
5 LCD Display Information 5.1 DV Playback Mode Please refer to the following table. 1 Folder and file number 2 Length of each Movie Clip 3 File Protection indicator 4 Battery status indicator 5 Resolution indicator 6 Slow motion playback button 7 Return button 8 Sound volume touch icons 9 Volume (“+” for up and “-“ for down) 10 Playback/Pause button 38 Downloaded From VideoCamera-Manual.
11 Fast forward playback button 12 Fast rewind playback button 13 Menu button 14 Delete button 39 Downloaded From VideoCamera-Manual.
5.2 Voice Recording Playback Mode Please refer to the following table. 1 Folder and file number 2 Length of each voice clip 3 File Protection indicator 4 Battery status indicator 5 Return button 6 Sound volume touch icons 7 Volume (“+” for up and “-“ for down) 8 Playback/Pause button 9 Fast forward playback button 10 Fast rewind playback button 11 Menu button 12 Delete button 40 Downloaded From VideoCamera-Manual.
5.3 DSC Playback Mode Please refer to the following table. 1 Folder and file number 2 DPOF(Digital Print Order Format) indicator 3 File Protection indicator 4 Battery status indicator 5 ISO value 6 Resolution indicator 7 Return button 8 Zoom-Out indicator 9 Zoom-In indicator 10 Next file 11 Previous file 12 Menu button 13 Delete button 41 Downloaded From VideoCamera-Manual.
6 Menu Options Please read this chapter to understand the settings and advanced operations of this Digital Video Camera. 6.1 Menus of Movie Clip Mode Press [MENU] button to display menu options of movie clip under the [DV] mode. 6.1.1 Quality 1. Turn [On] the Digital Video Camera and ensure it is in the [DV] mode. 2. Press [MENU] Button and press [4-way Direction] Button to select the [Quality] item. Press OK Button to display submenu; or touch the screen to select the item. 3.
4. If High Bit Rate is selected, transfer speeds of some Class 4 SD cards may not support video recording. So, Class 6 or above SD cards are recommended if High Bit Rate is selected. Also, If [High Bit Rate] is selected, [Pre-recording] and [Dual Streams] will be disabled 6.1.2 Resolution 1. Power [On] the Digital Video Camera and make sure it is in the [DV] mode. 2. Press [MENU] Button and press [4-way Direction] Button to select the [Resolution] item.
6.1.3 Pre-recording 1. Power [On] the Digital Video Camera and make sure it is in the [DV] mode. 2. Press [MENU] Button and press [4-way Direction] Button to select the [Pre-recording] item. Press OK Button or touch the screen to display submenu. 3. Use [4-way Direction] Button to choose [Off]/[On], and press OK Button or click the screen to confirm the setting. 4. If[ Pre-recording] is selected, [Time Lapse] will be disabled 6.1.4 Time Lapse 1.
4. If [Dual Streams] is selected, [Face Detection] 、[Time Lapse] 、[Slow Motion Video] 、[Electronic Image Stabilizer] and [Date/Time stamp] will be disabled Note: Dual streams only support these video formats: z NTSC: 1920 x 1080 30fps, 1280 x 720 60fps, and 1280 x 720 30fps. z PAL: 1920 x 1080 25fps, 1280 x 720 50fps, and 1280 x 720 25fps. 6.1.6 Face Detection 1. Power [On] the Digital Video Camera and ensure it is in the [DV] mode. 2.
6.1.8 White Balance 1. Power [On] the Digital Video Camera and ensure it is in the [DV] mode. 2. Press [MENU] Button and press [4-way Direction] Button to select the [White Balance] item. Press OK Button to display submenu; or touch the panel to select the item. 3. Press [4-way Direction] Button to select [Auto], [Incandescent], [Daylight], [Cloudy], [Fluorescent], or [Preset]. Press OK Button or touch the panel to confirm. Automatic white balance adjustment.
Normal Recordings with natural color. Art Recordings with oil painting color. Sepia Recordings with sepia-toned color. Negative Recordings with negative color. B/W Recordings with black/white color. Vivid Recordings with bright color. 6.1.10 Metering 1. Power [On] the Digital Video Camera and make sure it is in the [DV] mode. 2. Press [MENU] Button and press [4-way Direction] Button to select the [Metering] item. Press OK Button or touch the screen to display submenu. 3.
1. Power [On] the Digital Video Camera and ensure it is in the [DV] mode. 2. Press [MENU] Button and then press [4-way Direction] Button to select the [EV Compensation] item. Press OK Button or touch the screen to display submenu. 3. Press [4-way Direction] Button to increase/decrease the value. Press OK Button or touch the screen to confirm. 6.1.12 Backlight 1. Turn [On] the Digital Video Camera and make sure it is in the [DV] mode. 2.
6.1.14 Sharpness 1. Power [On] the Digital Video Camera and ensure it is in the [DV] mode. 2. Press [MENU] Button and press [4-way Direction] Button to select the [Sharpness] item. Press OK Button or touch the screen to display submenu. 3. Press [4-way Direction] Button to select [Normal], [High], or [Low]. Press OK Button or touch the screen to confirm. Normal For normal scenes. High For sharper scenes. Low For softer scenes. 6.1.15 Motion Detection 1.
The following image will be shown when the motion detection function is on: Motion Detection On If the pillar rises to peak, the Digital Video Camera will take movie clips automatically without pressing the recording button. Start recording 50 Downloaded From VideoCamera-Manual.
If the pillar disappears, the Digital Video Camera will end taking movie clips automatically without pressing the recording button. End recording 6.1.16 Slow Motion Video 1. Turn [On] the Digital Video Camera and make sure it is in the [DV] mode. 2. Press [MENU] Button and press [4-way Direction] Button to select the [Slow Motion Video] item. Press OK Button or touch the screen to display submenu. 3. Press [4-way Direction] Button to select [Off]/ [On]. Press OK Button or touch the screen to confirm. 4.
6.2 Menu Options of Movie Clip/Voice Playback When in [Movie Clip]/ [Voice] playback mode, press the [MENU] Button to show the movie clip options menu. 6.2.1 File Protection 1. Power [On] the Digital Video Camera and make sure it is in the [Movie Clip]/ [Voice] Playback mode. 2. Press [MENU] Button. Then, press [4-way Direction] Button or touch the screen to select the [File Protection] item. Press OK Button or touch the screen to display submenu. 3. The icon represents the file is under protection.
6.2.2 Play Options 1. Power [On] the Digital Video Camera and make sure it is in the [Movie Clip]/ [Voice] playback mode. 2. Press [MENU] Button. Then, press [4-way Direction] Button or touch the screen to select the [Play Options] item. Press OK Button or touch the screen to display submenu. 3. Use [4-way Direction] Button to select [Play One], [Play All], [Repeat One], or [Repeat All], then press OK Button or touch the screen to confirm. The movie clip will playback automatically.
5. You can choose the [Delete Selections] item to delete certain file. Delete One Delete one file. Delete All Delete all files. Delete Selections Select the file and delete. Note: The files cannot be recovered once deleted. Therefore, please make sure you have a backup file before delete. The protect files will not be able to delete. You must unlock the file before deleting it. 54 Downloaded From VideoCamera-Manual.
6.3 Menu Options of Camera Mode During [DSC] Mode, press [MENU] Button to display camera mode option menu. 6.3.1 Quality 1. Turn [On] the Digital Video Camera and ensure it is in the [DSC] mode. 2. Press [MENU] Button and press [4-way Direction] Button to select the [Quality] item. Press OK Button or touch the screen to display submenu. 3. Press [4-way Direction] Button to select [Super Fine], [Fine], or [Normal]. Press OK Button or touch the screen to confirm the setting. 6.3.2 Photo Size 1.
6.3.3 3:2 2592 x 1728 pixels 16:9 2592 x 1458 pixels Capture Mode 1. Power [On] the Digital Video Camera and make sure it is in the [DSC] mode. 2. Press [MENU] Button and then press [4-way Direction] Button to select the [Capture Mode] item. Press OK Button or touch the screen to display submenu. 3. Press [4-way Direction] Button to select [Normal], [Continue Shot], [AEB mode], [Fast Cont.], or [Super Fast Cont.]. Press OK Button or touch the screen to confirm. Normal Shoot single photo.
3. Press [4-way Direction] Button to select [Off], [1 second], [3 seconds], or [5 seconds]. Press OK Button or touch the screen to confirm. 6.3.5 Face Detection 1. Power [On] the Digital Video Camera and make sure it is in the [DSC] mode. 2. Press [MENU] Button and press [4-way Direction] Button to select the [Face Detection] item. Press OK Button or touch the screen to display submenu. 3. Press [4-way Direction] Button to select [Off], or [On]. Press OK Button or touch the screen to confirm. 6.3.
3. Press [4-way Direction] Button to select [Auto], [Incandescent], [Daylight], [Cloudy], [Fluorescent], or [Preset]. Press OK Button or touch the screen to confirm. Auto Automatic white balance adjustment. Incandescent The setting is suitable for Incandescent lamp lighting, or environments with dark light. Daylight For daylight recording. Cloudy For cloudy or shady environments. Fluorescent For fluorescent lamp lighting, or environments with bright light.
Images with bright color. Vivid 6.3.9 Metering 1. Turn [On] the Digital Video Camera and make sure it is in the [DSC] mode. 2. Press [MENU] Button and press [4-way Direction] Button to select the [Metering] item. Press OK Button or touch the screen to display submenu. 3. Use [4-way Direction] Button to select [Center], [Average], or [Spot]. Press OK Button or touch the screen to confirm the setting.
6.3.11 EV Compensation Use this function to adjust the value of EV compensation, which is ranged from -2.0EV to +2.0EV (at 0.3EV increment). The higher the EV value, the brighter the image will be. 1. Power [On] the Digital Video Camera and make sure it is in the [DSC] mode. 2. Press [MENU] Button and press [4-way Direction] Button to select the [EV Compensation] item. Press OK Button or touch the screen to display submenu. 3. Press [4-way Direction] Button to increase/decrease the value.
High Images with brighter scenes. Low Images with darker scenes. 6.3.14 Sharpness 1. Power [On] the Digital Video Camera and make sure it is in the [DSC] mode. 2. Press [MENU] Button and press [4-way Direction] Button to select the [Sharpness] item. Press OK Button or touch the screen to display submenu. 3. Press [4-way Direction] Button to select [Normal], [High], or [Low]. Press OK Button or touch the screen to confirm. Normal Images with normal scenes. High Images with sharper scenes.
6.4 Menu Options of Photo Playback 6.4.1 File Protection 1. Turn [On] the Digital Video Camera and ensure it is in the [Playback] mode. 2. Press [MENU] Button and press [4-way Direction] Button to select the [File Protection] item; press OK Button or touch the screen to display submenu. 3. The locked icon protection. will be shown to indicate the file is under Protect One Protect one file. Unprotect One Unprotect one file. Protect All Protect all files. Unprotect All Unprotect all files.
2. Press [4-way Direction] Button to select the [Slide Show Setting] item to enter into submenu; or touch the screen to select the item. 3. Use [4-way Direction] Button or touch the screen to choose [Off], [1 Second], or [3 Seconds]. The images will playback automatically. 6.4.3 Slide Show Effect 1. Turn [On] the Digital Video Camera and make sure it is in the [Playback] mode. 2.
Note: The files cannot be recovered once deleted. Therefore, please make sure you have a backup file before delete. The protect files will not be able to delete. You must unlock the file before deleting the protected file. 6.4.5 DPOF Use DPOF (Digital Print Order Format) to mark the printing information stored in the memory card. 1. Turn [On] the Digital Video Camera and make sure it is in the [Playback] mode.
6.5 Setting Menu Setting Menu can be applied on all kinds of the Digital Video Camera settings. 6.5.1 TV Type 1. Power [On] the Digital Video Camera and switch to [Setting] mode. 2. Press [4-way Direction] Button to select the [TV Type] item. Press OK Button or touch the panel to display submenu. 3. Use [4-way Direction] Button to choose [NTSC] or [PAL], then press OK Button or touch the screen to confirm. Note: The video resolution will be different due to various TV Type settings.
6.5.2 File Number (Default: Serial) The file number can be set in this function. 1. Turn [On] the Digital Video Camera and switch to [Setting] mode. 2. Press [4-way Direction] Button to select the [File Number] item. Press OK Button or touch the screen to display submenu. 3. Press [4-way Direction] Button to choose [Reset]/ [Serial], then press OK Button or touch the panel to confirm. Notes: 1. The file number will start from 0001 when setting to [Reset]. 2.
6.5.6 LCD Brightness This function is to adjust the brightness of LCD. 1. Turn [On] the Digital Video Camera and switch to [Setting] mode. 2. Use [4-way Direction] Button to select the [LCD Brightness] item, then press OK Button or click the screen to confirm. 3. Use [4-way Direction] Button to select [Low], [Medium], or [High], then press OK Button or touch the screen to confirm the setting. 6.5.7 Date/Time Stamp This function is to stamp date/time on photos. 1.
6.5.9 Language Please refer to chapter 2.7.2 “Setting Time/Date and Language.” 1. Turn [On] the Digital Video Camera and switch to [Setting] mode. Move [4-way Direction] Button left/right to select the [Language] item, and press OK Button or click the screen to confirm. 6.5.10 Flicker Use this setting to adjust the frequency system which corresponds to your local area. 1. Turn [On] the Digital Video Camera and switch to [Setting] mode. 2.
6.5.12 Sound Use this function to adjust the sound volume. 1. Turn [On] the Digital Video Camera and switch to [Setting] mode. 2. Press [4-way Direction] Button to select the [Sound] item. Press OK Button or touch the screen to display submenu. 3. Press [4-way Direction] Button to select [High], [Medium], [Low], or [Off], then press OK Button or touch the screen to confirm. 6.5.13 LCD Correction This function is to correct the accuracy of LCD touch screen. 6.5.
7 PC and TV Connection 7.1 Connecting to the Computer As shown below, use the provided USB cable and connect the Digital Video Camera to a PC for file transmission. 7.2 Connecting to TV z As shown below, use the provided video cable and connect the Digital Video Camera to a TV. Note: Some TVs may not recognize the video format (1080p, 30fps)..Please check the user manuals of your TVs for more assistance. 70 Downloaded From VideoCamera-Manual.
z As shown below, use the provided HDMI cable to connect the Digital Video Camera to a TV for high resolution picture display. 71 Downloaded From VideoCamera-Manual.
8 Installing the Software 1. Place the attached CD ROM into the CD player. 2. If the CD does not execute automatically, please use Windows File Manager to execute the Install_CD.exe file in the CD. The following screen will be shown up. 3. Press the [Menu] item to start the installation process according to the instructions on-screen. 72 Downloaded From VideoCamera-Manual.
9 Editing Software ArcSoft Total Media Extreme (TME) ™ manages your media for you, and gives you tons of fun and exciting ways to create and share projects featuring your photo, video, and music files. Edit, enhance and add creative effects to your photos. You can z Create your own movies or photo slide shows complete with soundtrack. z Upload your files easily to YouTube™! z Or share them through simple email attachments or popular photo printing. z You can go to http://www.arcsoft.
10 Appendix Specifications Sensor 1/3.2 inch. 5 Mega Pixels CMOS sensor Zoom 23X optical zoom Digital zoom: Still: 60X ,Video: 120X Playback: Up to 10X Lens F = 3.5(W) ~ 4.1 (T) f = 4 ~ 92 mm Focus range 20 cm ~ Infinity (Wide); 200 cm ~ Infinity (Tele) LCD 3.5” LCD 230k pixels Movie Mode Full HD 1920x1080; HD 1280x720; WVGA 848x480; 16M (4608 x 3456 interpolated) 5M (2592 x 1944) Image Resolution 3:2 (2592 x 1728) 16:9 (2592 x 1458) Shutter Speed Auto: 1/8000 ~ 1/2 sec. Night: 1/8000 ~ 2 sec.
Dimensions / Weight 123.5 x 55 x 59.2 mm 330 g (without battery & SD card) Interface Digital output: USB 2.0 compatible Audio / Video output: NTSC/PAL; HDMI Accessories Quick Guide / Lithium-Ion battery / AV Cable / HDMI cable / USB cable / Software CD ROM / Adaptor / Hand Strap / Pouch 75 Downloaded From VideoCamera-Manual.
Troubleshooting Problem Possible Cause Solution Can not turn on the power of Digital Video Camera. 1. The Battery is not inserted correctly. 2. The Battery is dead. 1. Please insert the battery correctly. 2. Replace the battery. Pictures are not stored in the memory. Power off before storing the images. Please change to a new battery when the battery indicator turns to red color. Camera shutdown when using Self-timer shooting picture. The Battery in camera is dead. Change to a new battery.
