Operation Manual

English
52
System setup : Advanced menu
• High Altitude Mode
Press
◄
/
►
to enable or disable High Altitude Mode. Enable this function when the operating
altitude is higher than 1500m or the ambient temperature is over 40°C.
• Audio Settings
Press ENTER to enter the Audio Settings menu. See "Audio Settings menu" on page 53
for more details.
• Light Source Settings
Press ENTER to enter the Light Source Settings menu. See "Light Source Settings menu"
on page 54 for more details.
• Security Settings
Press ENTER to enter the Security Settings menu. See "Security Settings menu" on
page 54 for more details.
• Baud Rate
Press
◄
/
►
to select RS-232 baud rate. The options are 2400, 4800, 9600, 14400, 19200,
38400, 57600 and 1152000.
• Test Pattern
Press
◄
/
►
to select the test pattern. The options are Off, Grid, White, Red, Green, Blue,
Black, RGB Ramps, Color Bar, Step Bars, CheckBoard, Horizental Lines, Vertical Lines,
Diagonal Lines, Horizontal Ramp and Vertical Ramps.
• Projector ID Setting
Press
◄
/
►
to enable or disable the projector ID.
• Closed Caption
Press ENTER to enter the Closed Caption menu. See "Closed Caption menu" on page 55
for more details.
• 12 Trigger
Press
◄
/
►
to enable or disable 12V trigger function.
• Standby Settings
Press ENTER to enter the Standby Settings menu. See "Standby Settings menu" on
page 55 for more details.