Operation Manual
English
57
FUNCTION DESCRIPTION
3.SOURCE menu
Quick Auto
Search
See “Switching input signal” on page 34 for details.
HDMI Range
Select the type of input source for the HDMI signal. "Auto" means to
conrm and recommend the setting. You can also select the source type.
Different brightness standards are carried out for different source types.
This function is only available when a HDMI signal is
selected.
Color Space
Conversion
See “Changing Color Space” on page 34 for details.
4.SYSTEM SETUP: Basic menu
Language
Sets the language for the On-Screen Display (OSD) menus. See “Using the
menus” on page 31 for details.
Projector
Installation
The projector can be installed on a ceiling or behind a screen, or with one
or more mirrors. See “Installation” on page 18 for details.
Menu Settings
Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
The range is from 5 to 30 seconds in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
If you select On, the projector will remind you to clean the lter when
necessary.