Operation Manual

English
29
Correcting 2D keystone
2D Keystone function enables a wider projector installation area compared to conventional projectors
with limited positioning in front of the screen.
To correct this, you will need to manually correct it following one of these steps.
y Using the projector or remote control
Press / to display the 2D Keystone page.
Press ▲/▼ to adjust vertical values from -30 to 30. Press ◄/► to adjust
horizontal values from -30 to 30.
2D Keystone
MENU
EXIT
y Using the menus
1. Press MENU/EXIT and then press ◄/► until the
DISPLAY menu is highlighted.
2. Press ▼ to highlight 2D Keystone and press MODE/
ENTER. The 2D Keystone page displays.
3. Press ▲, ▼, ◄, ► to adjust the keystone values.
Display
MENU
EXIT
S-VIDEO
Wall Color OFF
Auto
ENTER
Aspect Ratio
2D Keystone
Corner Fit
Position
Phase
H. Size
Digital Zoom
3D
y Using QUICK INSTALL key
1. Press QUICK INSTALL on the remote control.
2. Press ▼ to highlight 2D Keystone and press MODE/
ENTER. The 2D Keystone page displays.
3. Press ▲, ▼, ◄, ► to adjust the keystone values.
MENU
EXIT
Projector Installation
Test screen
2D Keystone
Corner Fit
ENTER
Quick Install