Operation Manual

English
7
Interlock switches protection
SWITCH A:Will be activated when the
top cover is removed. The projector is
then being powered off.
SWITCH B(x2):Will be activated when the projection
lens is removed. The projector is then being powered off.
Laser parameters
Blue Laser Diode Wavelength: 450nm - 460nm
Mode of Operation: Pulsed, due to frame rate
Pulse width: 0.74ms
Pulse repetition rate: 240Hz
Maximum laser energy: 0.376mJ
Total internal power: >100W
Apparent source size: >10mm, at lens stop
Divergence: >100 mili Radian