Operation Manual

English
51
▲▼
arrow keys to select desired memory, and press Enter key again to retrieve and to load the
saved lens settings. The projector can keep 10 groups of lens settings. The memory position with
lens settings will be marked in a different color and you can select only one of those settings.
Load Memory
Save Memory
Clear Memory
ENTER
No Signal MENU Exit
Picture
Setup \ Lens Memory
Display Setup Advanced System Information
Save Memory: Edit memory name and save current memory settings including lens shift, zoom
and focus. Press Enter key to display the virtual keyboard. Press
▲▼◄►
and Enter keys to
select or accept setup values.
Clear Memory: Select the memory set to be cleared and then press ENTER button to conrm
clearing memory set.
Memory 1 Execute
Memory 2
Memory 3
Memory 4
Memory 5
Memory 6
Memory 7
Memory 8
Memory 9
Memory 10
No Signal MENU Exit
Picture
Setup \ Lens Memory \ Clear Memory
Display Setup Advanced System Information
• Center Lens: This is the lens calibration function. The projector calibrates the lens shift, focus
and zoom parameters for the precise lens memory function. After performing this function, the
lens will be moved to the center position as factory default.
Note:
• There are two default center positions for UST (Ultra Short Throw) Lens and non-UST Lens. Make sure Lens