Operation Manual
English
35
Correcting picture distortion
When the image is projected either from the top or from the bottom towards the screen at angle,
the image becomes distorted trapezoid Keystone function in the Display > Keystone can be used
to correct distortion or
◄
►
to correct vertical distortion, till you are satised with the shape.
When the values reach their maximum or minimum with repeated key presses, the picture’s shape
will stop changing. You will not be able to change the picture further in that direction.
Auto-adjusting the image
In some cases, you may need to optimize the RGB picture quality. To do this, press AUTO PC key
on remote control or AUTO SYNC on panel, the built-in Intelligent Auto Adjustment function will
re-adjust the values of Frequency and Clock to provide the best picture quality.
Note:
This function is only available when a PC signal (analog RGB) is selected.