Operation Manual

English

Fine-tuning the image size and clarity

1. Press the ZOOM + or ZOOM- button on the control panel or the remote control to adjust

the projected imaged as you desired.

2. Sharpen the picture by pressing FOCUS+ or FOCUS- button on the control panel or the

remote control.

Adjusting the projection angle

There are four adjuster feet on the bottom of the projector, these can be used if it is necessary to

change the projection angle. Screw the feet in or out as appropriate to aim and level the projection

angle.

1. Twist the adjusters clockwise to raise the

level of the projector.

2. To lower the level of the projector, lift the

projector and twist the adjusters counter

clockwise.

Note

Adjusting foot will be disassembled after lower the foot more than 4 cm.