Computer Monitor User Manual
Table Of Contents
- Copyright
- Disclaimer
- Please follow these safety instructions for best
- Table of Contents
- Getting started
- Getting to know your Monitor
- How to install your monitor hardware
- How to install your monitor’s software
- Choosing the best picture resolution
- How to choose the right Refresh Rate
- How to set the Picture Optimization
- How to adjust your Monitor
- Troubleshooting
- Supported operating modes
- Specifications

29 Troubleshooting
Is the prompt on the display illuminated in orange?
If the LED is illuminated in orange, the power management mode is active. Press any button on
the computer keyboard or move the mouse. If that does not help, check the signal cable
connectors. If any pin is bent or broken off, please contact your dealer to get necessary support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
The image is distorted, flashes or flickers:
Read the Choosing the best picture resolution section and then select the correct resolution,
refresh rate and make adjustments based on these instructions.
The image is displaced in one direction:
Read the Choosing the best picture resolution section and then select the correct resolution,
refresh rate and make adjustments based on these instructions.
Need More Help?
If your problems remain after checking this manual, please contact your place of purchase or
e-mail us at: Support@BenQ.com