Joybee P330 Digital Audio Player User.
Copyright All rights reserved. No part of this publication may be reproduced, transmitted, recorded,stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic or mechanical, recording, photocopying, or otherwise,without the prior written permission of the BenQ Corporation.
Important information FCC compliance This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference to radio or television reception. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications.
handed over to the applicable take-back scheme for the recycling of electrical and electronic equipment. By ensuring this product is disposed on correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of material will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local BenQ office.
Force shutting down the Player… … … … … … … … … … … ..13 Using Joybee P330 as digital audio Player… … … … … … … ..14 Playing the music files… … … … … … … … … … … … … ..… ..14 Using the recording functions… … … … … … … ..… … … … ..25 Playing the recorded files… … … … … … … … .… … … … … ..29 Listening to FM radio… … … … … … … … … … … … … … … … 34 Browsing the JPEG/BMP/GIF pictures… … … … … … … … ..37 Playing the AMV files… … … … … … … … … … … … … … … ..38 Browsing the E-book… … … … … … … … … … … … … … … .
Precautions u u u u u u u u Do not place the Player in places with too high/ low temperature or damp. Do not let any object drop or impact onto the Player. Avoid using the Player in places with too much dust or soot. Do not use chemicals such as alcohol and benzene attenuant. Never disassemble, fix or modify the Player. Do not impact onto the LCD of the Player. Keep away from any objects carrying static. The Player should never suffer water drops or splashes.
BenQ Joybee P330 Digital Audio Player Introduction Thank you for purchasing the BenQ Joybee P330 Digital Audio Player. In this manual, you will find all the information about your player, including instructions. Please read this manual carefully in order to make the best use of your player.
Package contents Please check the contents of the packaging. Should any part be missing or damaged, please contact your dealer immediately The parts illustrated may differ slightly in appearance from those supplied. Basic package Setup CD-ROM Earphone Warranty card USB Connecting Quick Start Adapter Notice: All affixes are according to substance.
Getting to know your Joybee P330 Digital Audio Player EQ A-B Play Mic Earphone LCD USB mini Connect Five-key ON/OFF 10
Key definition PLAY : Turn On, Turn Off, Play, Pause, and Stop. MODE: Switching Working Mode, Menu Options, Interface Switching. NEXT LAST : Move to Right, Forward : Move to Left, Backward VOL+: Volume Increasing, Last Item VOL-: Volume Decreasing, Next Item A-B/REC: Special A -B / Recording Hot Button EQ: When playing MP3 musical files, use this button to directly change their sound effects without entering the option menus.
The Joybee N200 Digital Audio Player menu map Main menu Repeat Music Equalizer Tempo Replay Voice REC Replay times Replay gap Play REC FM Clock PIC LCD set Language Video Power off Replay mode E-Book Setting Memory info Firmware version Firmware upgrade 12
Getting Started Charging the player The player offers about 20 hours of continuous MP3 playtime when the battery is new and fully charged. The exact playtime is subject to battery age and condition, and the format of the files being played. Exact charging time differs according to battery status, which is indicated in the battery bar on the player display. The screen shows the progress of charging and indicates when charging is complete.
Turning the player on and off ・ To turn on the player, press and hold play key for 3 seconds when the power key is on. The player enters the last mode when it was turned off. ・ To turn on the player, press and hold play key for 3 seconds Locking the keys To avoid any accidental key touches which may cause unexpected behavior during the use of the player(like when the player is in your pocket), you can temporarily lock all the keys by pressing and holding EQ key during music or radio playback.
Using BenQ Joybee P330 as digital audio player Playing the music files Select the “Music” in the main menu, enter the music files playback interface. The Musical File Playback function realize the playback of musical files in MP3 and WMA formats along with the features of repeating, following and contrasting. It has the interfaces of stop, playing, lyrics display, repeating, deleting, directory selecting, as well as function selection and settings.
represents that the current song has its lyric. “My Heart Will Go On” is the name of the song. If the song does not hav e a Tag, then its file name will be displayed here. “Celine Dion” is the name of the singer. Button Function in the Stop Interface l Long-Press of MODE: Enter into the main menu. l Short-Press of MODE: Enter into the Stop menu interface. l Short-Press of PLAY: Play musical files. l Long-Press of PLAY: Turn the player off.
In this interface, press MODE to enter into the Deleting Ways selection interface. Button Function in the Deleting Interface l Long-Press of PLAY: Turn the player off. l Short-Press of PLAY: Return to the Stop Interface. l Short-Press of A-B: Switch to the recording interface and start recording. Directory Selection Interface You can select the valid directory (the directory that contains musical files) here to change the current playback directory.
next directory one by one. The selection strip scrolls in a way of two lines. l Short-Press or Long-Press of “Vol+”: The selection strip switches to the last directory one by one. The selection strip scrolls in a way of two lines. l A short-pres s of MODE will select the directory and return to the Stop interface. If the current directory (including the disk) is changed, then you need to reset the current file as the first, otherwise, the file and playback position will not be changed.
l Short-Press of A -B: Enter into the Repeat interface and confirm the A point. One more short-press of A-B will confirm the B point and start repeating the segment between A and B. Playing Menu Interface Note: This interface provides the user with the following options: ① Repeat: To set the ways for playing songs. ② Equalizer: To set sound effects for the playing songs. ③ Tempo rate: To adjust the speed of song playing, except for the songs in the WMA format.
Current directory, it will continue to play the songs in the next directory . Repeat One: Repeat playing the current song. Play Folder: The player will stop if it finishes playing the songs in the current directory. Repeat Folder: Repeat playing the songs in the directory. Repeat All: Repeat playing the songs in all directories. Random: Play the songs in the current directory in a random way. Pre-listen: Play the beginning 10 sec onds of all the songs in the current directory in order.
Manual Repeat Operation When you enter Manual Repeat, the “A” in will flash. u A short-press of NEXT or A -B will set the “A”point, and then “B”will flash. u A short-press of NEXT or A -B will set the “B” point. Then the segment between “A”and “B”will play repeatedly. u After a short-press of LAST or A -B or the set repeating times, the repeat function will be cycled. u A short-press of NEXT will enter the cycle of Follow -> Repeat. For the follow, ADPCM is adopted to record sound.
③ In all the steps above, a short-press of PLAY will quit the Repeat interface and the Playing interface, and return to the Stop interface. Auto Repeat Operation u When you enter Auto Repeat, the “A” in will flash. u A short-press of NEXT/A-B will set the “A”point, and then “B”will flash. u If the player finds a blank or after a short-press of NEXT/A-B, the Repeat will display, and the player will start repeating the segment between A and B.
③ In all the steps above, a short-press of PLAY will quit the Repeat interface and the Playing interface, and return to the Stop interface. Tempo rate Setting Interface Note: You can set the current playing speed in here. This will affect the playing of musical files in the MP3 format. However, this will not affect the files in WMA format. Replay times Note: The player will quit the Repeat mode after the set replay times. The repeat times can be 1 to 10.
Lyrics Show Interface Note: When you enter into the Lyrics Show interface, the current song continue to play and the corresponding lyrics will display according to the playing progress of the song. When the playing of the song is over, the player will run the subsequent song playing functions according to the Playing mode set. If the subsequent songs have lyrics, then the player will still work in the Lyrics Show interface.
lines. Each line has 7 Chinese characters. When the song is playing, its lyrics will be highlighted, and the next sentence of the lyrics will wait in the other part. The waiting lyrics will be highlighted when its time comes. The next sentence will be displayed in the part where the last sentence has finished its presence. Whereas the time in LRC usually has some delay, the lyrics can be showed 1 second ahead.
Using the recording functions Select the “Voice REC”in the main menu, enter the recorder interface. In this interface, it realize recording sound files of WAV and ACT format. It has the following interf aces: stop, recording, pause and directory selection. l 00:00:03 indicates the progress of the recording. In the Stop interface the length of the current recording will be displayed. l 05:05:17 indicates the space available for recording sound.
The Stop Menu Interface Note: You can select Local folder, REC Types and Exit in here. When you enter into this interface, the enabled position is the one where you quit last time. Local folder Selection Interface Note: Here, you can select any directory as your current recording directory. When you enter into the recording interface, you will be located at the current directory of the current disk.
The Recording Interface Note: When you enter into the Recording interface, a new recording file will be generated, and the recording will start in a current coding ways. The scrolling bar indicates that the player is in recording. It also indicates the progress of the current recording. Long press play key to save the file. Button Function in the Recording Interface l Short-Press of PLAY/A-B: To enter into the Pause Interface. l Long-Press of PLAY/A-B: To return to the Stop Interface.
will be saved, and then the player will return to the Stop interface. The Pause Interface When you enter into the Pause interface, the Pause status will be displayed and user’ s operations are wanted. In this case, 00:00:03 will flash at the rate of once per second. Button Function in the Pause Interface u Short-Press of PLAY/A-B: To return to the Recording interface to resume recording. u Long-Press of PLAY/A-B: To return to the Stop interface and save the recording in the file system.
Playing the recorded files Select the “Play REC”in the main menu, enter the interface of playing the recorded files. Realize the playback of *.WAV and *.ACT files. It has the following interfaces: Playing, Local folder Selection, Delete, as well as function selection and settings interfaces. Functions in the Stop Interface Note: When you enter into the Stop interface, the information about the current playing of recorded sound will be displayed and user’ s operations are wanted.
l Short-Press of LAST: To switch to the last recorded file in the current directory and reset the time point to zero. l Long-Press of LAST: To cycle to the last recorded files and reset the time point to zero. l Short-Press of NEXT: To switch to the next recorded file in the current directory and reset the time point to zero. l Long-Press of NEXT: To cycle to the next recorded files and reset the time point to zero. l Short-Press of A -B: To switch to the recording mode and start recording.
one by one. The selection strip scrolls in a way of two lines. Short-Press of MODE: To select the selection strip and return to the Stop interface. When you switch to a new directory, the resume playing memory will be cleared. l Short-Press of PLAY: To quit to the Stop Interface. l Long-Press of PLAY: To turn the player off. l Short-Press of A -B: To enter the recording function and start recording. Delete Interface Note: This interface is used for deleting files.
The “REC01 2004/01/01 10:23” is scrolling horizontally when the file is playing, Button Function in the Playing interface l Short-Press of MODE: To enter into the Playing menu interface. l Short-Press of PLAY: To enter into the Stop Interface. l Long-Press of PLAY: To turn the player off. l Short-Press of NEXT: To jump to next file and start playing from its beginning. l Short-Press of LAST: To jump to last file and start playing from its beginning.
Note: You can select Repeat Mode for playing songs in here. The music is still playing. It is the same as the interface when playing music. Repeat Interface Note: You can perform the repeat function here. Repeat Operation u When you enter the Repeat function, the “A” in will flash. u A short-press of NEXT will set the “A”point, and then “B”will flash. u A short-press of NEXT will set the “B” point. Then the segment between “A”and “B”will play repeatedly.
Listening to FM radio Select the “FM”in the main menu, enter the FM interface. Each time when you enter into this function, you are in the playing mode. You need to restore the current prestored radio stations to play. The first time you enter this function the frequency of the current radio station is the minimum one. : The current frequency position. It changes its position on the frequency scale with the changing of current frequency. : Frequency Scale. : The channel number of the current radio station.
play its program. If its frequency is the same as the one prestored, then its channel number will display. A short-press of LAST will move the frequency backward at a step of 100KHz for fine-tuning. u Short-Press of “Vol+”or ”Vol-”will adjust the volume. u Long-Press of MODE: To enter into the main menu. u Short -Press of MODE: To enter into the FM submenu. u Long-Press of PLAY: To turn the player off. u A short-press of PLAY will jump to the next prestored radio station.
l Long REC: To record the radio program you are now listening in act format. Exit: To quit the menu. l Save Note: Save the frequency to a new preset channel number. If the frequency is just the saved one that is fine tuned, then it will be saved to the current channel number. Delet Note: If you want to delete the current saved radio station, press MODE to delete the current channel and quit to the FM playing interface. Press of other buttons will cancel the deletion and quit to the FM playing interface.
Browsing the JPEG/BMP/GIF pictures Select the “PIC”in the main menu, enter the picture browsing interface. Realize viewing of JPEG, BMP, GIF pictures. Common formats are supported. File Selection Status A press of Play will enter into the Picture Playing status. u Press ”Vol-”or “Vol+”to select the next/last file. u A press of Mode will enter the Stop submenus. 1. Local Folder 2. Play Set, 3. Delete and 4. Exit. u There are two playing modes: 1. Manual and 2. Auto.
Playing the AMV files Select the “Video”in the main menu, enter the interface of playing AMV files. The *.AMV files could be playback in this function(the *.AMV files can be converted by using the software which in the CD). Button Function l Short-Press of MODE: Enter into the Playing menu interface. l Long-Press of MODE: Stop playing the AMV files and enter the main menu. l Short-Press of PLAY: Play or stop. l Long-Press of NEXT: Function as fast forward till the end of a AMV file.
Browsing the E-book Select the “E-Book” in the main menu, enter the interface of viewing txt files. File Selection Status When you enter from the main menu, you are at the file selection status. Press the PLAY button, begin to read the selected text file. u Press “Vol-”or “Vol+”to select the next/last file. u A press of Mode will enter the Stop submenus. 1. Local Folder 2. Play Set, 3. Delete and 4. Exit. u There are two playing modes: 1. Manual and 2. Auto.
u u u u A short-press “LAST”or “NEXT”to select the last page/next page A short–press of Play will return to the File Selection status. Long-Press of MODE: To enter into the main menu. Other buttons are disabled.
System setup Note: This is mainly used for the setting of system-related parameter and status display. These settings include: Clock, LCD Set, Language, Power off, Replay Mode, Memory Info, Firmware Version, Firmware Upgrade and Exit Menu. Interface Display After you finish setting each of these functional interfaces, you will still be returned to this interface. Clock Setting Button Function l A short-press “Vol+”will enter the procedure of setting the recording time, beginning with the setting of year.
recording. The Setting Procedure u 2003 flashes(2HZ) u Hold-on of NEXT will increase the year number step by step. u Hold-on of Last will decrease the year number step by step. u A short-press of “Vol+”will confirm the year number. Then the setting item will be switched to Month, whose setting method is the same as the that of Year. u Keeping on the short-press of “Vol+”will set Date, Hour and Minute in turn. Press “Vol+”once more to finish the setting.
Power off Button Function l A short-press of “Vol-“or “Vol+”will switch between the two modes. l A short-press of MODE will select and enter the Energy Saving Mode or Sleeping Mode. l A short-press of PLAY will cancel the setting and quit. Off time Note: In this mode, you can set the Auto Off, that is, in the Stop status, after how long the player will be turned off if there is no operations. The Range: 00’ -60’ . Sleep time Note: In this mode, you can set a time.
Replay Note: In here, you can set the working status for the repeat function. One is Manual, the other is Auto. It is the same as the Power off Setting interface. Button Function l A short-press of “Vol-“or ”Vol+”will switch between the two modes. l A short-press of MODE will confirm and quit. l A short-press of PLAY will cancel the setting and quit. Memory info Note: View the size and use of the memory. Firmware Version Note: Used to display the current firmware version.
Using BenQ Joybee P330 as a flash disk Realize the standard USB DISK functions. Except the UPGRADE module, in other status, when inserted into the USB Port, the player will enter into the Udisk function. Interface Display There are three status: Ready, Download and Upload. Ready means that the UDISK is ready to use. Download means that the UDisk is in downloading mode. Upload means that the UDisk is in uploading mode. Button Function u In Busy status, the player will not respond to any button operation.
u In Ready mode, a short-press of MODE will switch to the MUSIC mode. u Short-Press of A -B: Switch to the recording function and start recording. Ejection When PC is ejected (without pulling out the player from the PC), the player will go into the main menu automatically. Switch to UPGRADE When receiving the command of switching to UPGRADE from the PC UPGRADE application, the player needs to respond and execute the corresponding command.
Advanced operation BenQ Joybee P330 Notice: Before install the software, be sure of that the Media Player9(or above) and the DirectX9 have been installed in your PC. After the installation, you can find the program in the “start”: AMV Convert Tool：It could convert the other video formats to .mtv format, whic h could be played in the mp3. AMV Player: It could playback the *.amv files which have been converted.
Click the button of ①, select the files which need to be converted; click the button of ②, select the path of the .amv files(you could not change the name of the file) Click the button of ③, select the settings of the file which will be converted.
You can select: Frames per second of the AMV files: “low 、middle、high” After finishing the settings, click the “OK”button, it will return the main figure.
When the work finished, the figure will be shown as below: Click the “OK”button, the conversion will be finished. You can find the .amv files in the path you have appointed.
About the formats: If your Media Player could not playback the source video(click the button of ④ in the main figure, it could not playback normally), you should install the more decoders, or the software will not work successfully. AMV Player Select the “AMV Player”, the figure will be shown as below: The AMV Player will playback the amv files w hich have been converted you choose. MP3 Player Update Tool It upgrades a new version firmware for the MP3 Player.
Connect the MP3 player to the PC, enter the firmware upgrade interface, then click the program “MP3 Player Upgrade Tool”. Click the “Select new firmware file”to select the firmware you need, then click the “Begin upgrade”button. When the progress end, the upgrade is successful.
The tool is designed for format conversion from rcd/rec/act to WAV for recording files , with the function of files playback in WAV, MP3 format files included.
Troubleshooting 1.Push the play for 3 seconds, there is no display on the screen. Please check the following: The battery is no power left, or the ON/OFF switch is not put on the “ON”position. 2. The mess timing display on the screen when playbacking some songs. Please check the following: At the moment, the Mp3 file is compressed by VBR format, the change of the timing display is due to the change of the playback speed, so the songs’playback is no problems .
relevant software to recompress the song’ s file into a standard one. Remark: To confirm the song’ s file , you can connect the MP3 player to PC, to check the file information by the playback tool in the computer (e.g: Winamp) 5. No sound when playing a file. Please check the following: The volume is too low, or the device is connecting the computer, or there is no music files in your device. 6.
format) 10. Why my PC can’ t use the Video converting software installed in the player? Please check the following: If your computer is installed “Windows 2000”, please install the “DirectX9”software, which you may find in the CD we attached in the accessories.
58
