Operation Manual
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Connecting the power
- Connecting a computer
- Connecting Video source devices
- Connecting an HDMI source device
- Connecting a Component Video source device
- Connecting a Composite Video source device
- Connecting an iPhone/iPod device
- Connecting an external speaker
- Connecting a wireless dongle
- Connecting to an external memory device
- Playing sound through the projector
- Operation
- Starting up the projector
- Switching input signal
- Adjusting the projected image
- Hiding the image
- Securing the projector
- Selecting the aspect ratio
- Optimizing the image
- Operating in a high altitude environment
- Adjusting the sound
- Firmware upgrade
- Personalizing the projector menu display
- Playing files with iPhone/iPod
- Using iPhone/iPod pop-up menus
- Displaying images with PC and Video source devices
- Using PC/ Video pop-up menus
- Displaying files with internal memory, USB Drive and SD card
- Using USB Streaming
- Using Wireless Streaming
- Settings menu
- Shutting down the projector
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Operation
89
FUNCTION DESCRIPTION
Source
Shows the current signal source.
Picture Mode
Shows the selected mode.
Color System
Shows input system format: RGB or YUV.
Resolution
Shows the native resolution of the input signal.
LED Lamp
Lifetime
Displays the number of hours the lamp has been used.
Internal
Memory
Shows the Internal Memory capacity status: used memory size/total
memory size.
SD Card
Shows the SD Card capacity status: used memory size/total memory
size.
USB Drive
Shows the USB Drive capacity status: used memory size/total
memory size.
Firmware
Version
Shows firmware version: xx.xxx (Solomon)/xx.xxx (TI).
4. Information menu